Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
MUT2100EL sensors represent the state of the art of EUROMAG INTERNATIONAL product range for water cycle.

The sensor is IP67 and it is available also with IP 68 suitable for a permanent immersion in water up to a depth of 1.5m.

Rilsan® coating is stable since its first application and eco-friendly.

It offers unique benefits by protecting metal parts from corrosion and chemical attack against:

water, waste water, sea water
sea water environment
hydrocarbons, solvents and many chemical products.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
MUT2200 EL and MUT2500 EL represent the state of art of EUROMAG INTERNATIONAL production for water cycle and process application.

The new structure for the generation of the magnatic field, the innovative route of the signal generated by electrodes provide a sensor with an extremely wide measurement range: EL= Extended Linearity.

This new series follows the successful tradition of MUT 2200/2500 introducing a measurement range of more than 1:1000 without linearization software. These kind of performances allow very accurate measures on a wide flow rates, that, before, would have been reset because of the effects of the converters cut off.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
MUT 2200EL and MUT2500 EL rapresent the state of the art of EUROMAG INTERNATIONAL production for water cycle and process application.

The new structure for the generation of the magnetic field, the innovative route of the signal generated by the electrodes, provide a sensor with an extremely wide measurement range: EL= Extended Linearity.

This new sensors series follows the successful tradition of the MUT 2200/2500 introducing a measurement range of more than 1:1000 without linearization software.
These kind of performances allow very accurate measures on a wide flow rate range and to count lower flow rates that, before, would have been reset because of the effects of the converters cut off.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
MUT1000EL sensors represent the state of art of EUROMAG INTERNATIONAL production for water cycle and process application. The new structure for the generation of the magnetic field, the innovative route of the signal generated by the electrodes, is giving a sensor with an extremely measurement range, keeping the extremely compact dimensions: EL Extended Linearity.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
EUROMAG INTERNATIONAL MUT1100J are flangeless sensors that cover all diameters from DN 25 to DN 150. When light weight and compact dimensions are required, the choice of sensors cannot be other than MUT1100J. These models are installed beetween two flanges surrounded by studs. For this reason they are also called "wafer sensors".

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
EUROMAG INTERNATIONAL MUT500 series are the most suitable for the measurement of the small flow rates of liquids electrically conductive for temperature up to 160°. They cover all diameters from DN 3 to DN 20 as shown in Table 1.

The degree of protection is IP68 for 1.5 m permanent immersion in water. The flow tube is made in PTFE.

The coils for the generation of the magnetic field are mounted on the external part of the flow tube, all enclosed in the stainless steel sensor body. Two measurement electrodes are placed at diametrically opposite points of the flow tube.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The EUROMAG INTERNATIONAL MUT2400EL series are sensors specifically designed for use in the food processing industry. They are made of materials approved for the purpose by international regulations, they are compatible with the temperature and products required for sanitary reasons, and equipped with the attachments used today in the foodstuffs field.

They are suitable for the flow rate electrically conducible liquids with a temperature up to 140°C. The MUT2400EL sensors are manufactured with diameters from DN 25 to DN 100 as indicated in Table 1. The degree of protection is IP 68 for a permanent emersion in water to a depth of 1.5 meters.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Encouraged by the RD dept.of "Automobili Lamborghini S.p.A.", Euromag International has recently developed and completed a brand new flowmeter, designed primarily for the automotive market.

Designed with light and innovative materials, MUT4000 has a compact and versatile design with hose connections, for a quick easy installation.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
EUROMAG INTERNATIONAL presents the new MUT1222 electromagnetic insertion flowmeter.
The product’s compact size allows installation on small pipes, providing water monitoring in applications considered impossible.
Delivering highly accurate bi-directional measurement for water distribution and raw water pipelines.
The MUT1222 can be used as a portable or a dedicated / permanent instrument.
“Hot tap” installation provides for a supply without interruption throughout the installation process.
Easy programming via keyboard or carried out via MC608 software through RS485/USB connection.

Suitable for pipe size between DN40 to DN1000.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
EUROMAG INTERNATIONAL Insertions flow meters represent the best answer when low cost and good performance are needed. The MUT2700 sensors are suitable for wide pipes, and can be installed without interrupting the flow.

They are made of a probe wich has to be inserted into the tube for 1/8 of its internal diameter. The nominal working pressure is 25 bar. The sensor is installed trough a treaded muff to be connected to its ball valve, once it is welded to the pipe.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
EUROMAG INTERNATIONAL Insertion flowmeters represent the best answer when low costs and good performance are needed.

EUROMAG INTERNATIONAL MUT2660 sensors are suitable for small pipes from 80 mm DN to 500 mm under a maximum pressure of 10 bar. They are made of 34 mm probe which has to be inserted into the tube for 1/8 of its internal diameter. The sensor is installed through 1.1/4" threaded brass muff , to be welded to the pipe.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
EUROMAG INTERNATIONAL Insertion flow meters represent the best answer when low cost and good performance are needed. The MUT2770 sensors are suitable for wide pipes under maximum pressure of 16 bar in the standard version (as indicated in table 1 and 2).

They are made of a 47 mm probe, which has to be inserted into the tube for 1/8 of its internal diameter. As all magnetic meters, they can be used to measure liquid flow rates with electrical conductivity of 5 μS/cm minimum.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The MC608 A/B converter has been designed with the purpose of meeting all the requirements of modern water management systems. The converters MC608 A/B are compatible with all EUROMAG INTERNATIONAL sensors.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Converter MC308C is part of the family of standard electronics available for all water cycle and process applications. It may be used with any EUROMAG INTERNATIONAL electromagnetic flow sensor

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The Euromag International converter MC108 represents the most versatile electronics of the highest performance, able to satisfy all of the most difficult applications. They can be connected to any electromagnetic sensor manufactured by EUROMAG INTERNATIONAL.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
EUROMAG INTERNATIONAL Converters Series MC308 represent the standard electronics available for all water cycle and process applications. It may be used with any EUROMAG INTERNATIONAL electromagnetic flow sensor.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The MC106 series of Euromag International converter has essential and economic charachteristics especially where a single output measurement signal is required. Other unrequired functions would increase cost and dimensions. It is applicable to all "full board" electromagnetic sensors manufactured by EUROMAG INTERNATIONAL

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The MC106 series of EUROMAG INTERNATIONAL converter has essential and economic charachteristic, especially where a single output measurement is required. Other unrequired functions would increase costs and dimensions.It is applicable to all "full board" electromagnetic sensors manufactured by EUROMAG INTERNATIONAL.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The solution for fix installation

The Eurosonic 2000 flow meter is a fixed installation unit to be used in every industrial application. The Eurosonic 2000 flow meter is based on clamp-on transit-time flow measurement principle. It measures the flow rate of liquid in a pipe from outside of the pipe by using a pair of ultrasonic transducers.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The universal solution in case of continue measuring or on-fields tests

The portable flow meter is a battery-powered ultrasonic flow meter with the capability of a full size flow meter. It is carefully designed for portability and ease of use. The portable flow meter is based on clamp-on transit-time flow measurement principle. It measures the flow rate of liquid in a pipe from outside of the pipe by using a pair of ultrasonic transducers.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The ideal unit for measuring tests

The Hand Held flowmeter is a battery powered ultrasonic flow meter with the capability of a full size flow meter. It is carefully designed for portability and ease of use. The Hand Held flow meter is based on clamp-on transit-time flow measurement principle. It measures the flow rate of liquid in a pipe from outside of the pipe by using a pair of ultrasonic transducers.