Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Arm length Two piece arm legth adjustable between 86.4 to 106.7 cm (34 to 42 in) Work Envelope Covers a 61 x 76.2 cm (24 x 30 in) horizontal rectangular work envelope Annodized aluminum construction Anti-corrosive and durable construction. Parallel link arm Outer portion of the arm is a dual parallel link arm designed for 50 cm (20 in) of vertical travel Tool holder The tool holder can handle tool diameters from .5 in (12.7 mm) up to 2.5 in (63.5 mm) and is adjustable for horizontal or vertical tool orientations. It can be ordered for bi-directional tilt (p/n 54033162) or single-directional tilt (p/n 54033196). Mounting Plates Mounting plates allow the unit to be mounted to a bench, wall, column or ceiling etc

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Accessories consist of bench clamp, clamps for electtic tools (Delvo & VersaTec), and torque absorber arm to eliminate reaction torque.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Steel Construction with E-Coat

- Lightweight but durable for continuous duty
- Corrosion-resistant
Spring Balancer Hanger

All arms are equipped with a roller-mounted spring balancer hanger for smooth motion of the tool.
Electric Cord Clamp Kit

Standard with appropriate models.
Dimensions

All models have a 30"(762mm) arm reach with a height of 42"(1067mm).

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Smooth vertical travel

Super linear bearings for effortless vertical travel and maintenance free operation
Adjustable length reaction bar

The IRZ series has an adjustable reaction bar between 48 in (1219 mm) and 72 in (1829 mm), at 2 in (50 mm) increments, to eliminate the need for extension tubes and to ensure proper positioning of unit
Suspension kits

Optional single or dual trolley suspension for suspending from an overhead rail system
Optional Tool holders

360 degree - 3 axis or fixed - 2 axis tool holder clamps are available

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Smooth vertical travel

Super linear bearings for effortless vertical travel and maintenance free operation
Optional Up/Down Control

Also available with a ZA Up/Down control for lifting applications up to 150 lb (68 kg), order part number 45621109
Optional suspension kits

Optional carriage suspension for suspending from an overhead rail system
Optional tool holders

Optional 360 degree - 3 axis or fixed - 2 axis tool holder clamps are available

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Smooth Vertical Travel

Super linear bearings for effortless vertical travel and maintenance free operation
Adjustable length reaction bar

The IRZ series has an adjustable reaction bar between 40 in (1016 mm) and 60 in (1524 mm), at 2 in (50 mm) increments, to eliminate the need for extension tubes and to ensure proper positioning of unit
Suspension kits

Optional single or dual trolley suspension for suspending from an overhead rail system
Tool Holders

Optional 360 degree - 3 axis or fixed - 2 axis tool holder clamps are available

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Inverse Mounting Kits for QTA Series Arms allow the arm to be mounted up-side down while maintaining functionality.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Upper Pole Clamps for QTA Series Arms can be used as a hard stops for vertical travel or can be used for added top-end support when fixed to a wall or column

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Rotating tool holders allow you to swivel the tool in two different axes while maintaining support and reducing torque reaction. Available for arms up to 40 Nm torque reaction.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
This tool holder allows you to screw a 1/4" NPT fitting inline tool to the torque reaction arm. Available only for the QTA010 arm

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Used for mounting your right angle tools to QTA torque reaction arms. Available for arms up to 100 Nm torque reaction.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Used for mounting your pistol-grip tools to QTA torque reaction arms. Available for arms up to 40 Nm torque reaction.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
This inline tool holder comes standard on models QTA010, QTA020, QTA040, & QTA100 torque arms.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Picture shown above highlights tool holder with bolt-on flange (flange is not included with tool holder).
Bolt-on flange may be required if your tool did not come with an integrated flange or you do not currently have a bolt-on flange. Please see the selection chart to determine which item(s) you require for your tool.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Working reach of 79" allows this arm to be used in assembly line applications
Equipped with Ingersoll Rand air cylinders and regulator, this arm is capable of handing up to 50 lbs of weight with very little effort provided by the operator
Safety stop eliminates over-extending of arm
Arm height is adjustable at column

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Arm height is adjustable at column
Cable management clips included to route air hose or DC tool cable
Versatile end plate allows better positioning of tool holders and more area to mount tool accessories such as dead handles
Various Ingersoll Rand QA & QE series tool holders available (generic tool holder not included)

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Lightweight anodized aluminum arm with steel column
Two die-cast aluminum Ingersoll Rand spring balancers
Various Ingersoll Rand QA & QE series tool holders available (generic tool holder not included)
Cable management clips included to route air hose or DC tool cable
Adjustable to mount to the floor or on a bench

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Lightweight anodized aluminum arm with steel column
Two die-cast aluminum Ingersoll Rand spring balancers
Various Ingersoll Rand QA & QE series tool holders available (generic tool holder not included)
Cable management clips included to route air hose or DC tool cable
Adjustable to mount to the floor or on a bench