Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The SPD480 determines phase rotations on secondary potential transformers

Easy to operate - connect one lead to each phase.
Large alligator clips for easy connection to cables and bus bars.
Operates properly on variable frequency drives. Does not give false readings by pulsed waveforms.
Verify proper rotation on feeder extensions.
Determine phase rotation on secondary potential transformers.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The MotorAnalyzer is a universal tester for testing electric motors and winding material. This user-friendly and mobile unit comprises ten different test methods.

Features:

Ten test methods
Fully-automatic quality assessment
Automatic switch-over between the three motor connection leads
Manual and automatic testing
Localization of turn-to-turn faults
Mains and/or battery operation
Light weight
Available in a solid measurement case
Rotary switch for quick selection of test methods
Integrated result storage for transmission via RS232 interface
Storing and printing test results via PrintCom

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features:

Digital surge test with patented evaluation
Surge test with 100nF/200nF (depending on the device) and up to 1500A surge current
Partial-discharge analysis for detecting special insulation faults
Resistance test in 4-wire configuration with temperature compensation
Insulation-resistance test with automatic PI test
Optimized for maintenance
Four winding connections (3 winding leads + star point) plus frame connection
Automatic testing with go / no go comparison
Integrated armature-testing wizard and automatic armature adapter
Compact and lightweight MTC2-light -- suitable to be taken as luggage on air travel
Remote control of an AC high-voltage tester and reading in of the test results

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
ALL-TEST PRO® 33 Industrial

Check and test your electric motors easily with the All-Test PRO AT33 Industrial

The AT33IND instrument is the PERFECT TOOL for troubleshooting, inspection of incoming or stored motors before installation or repair and shows the complete condition of the Stator Windings, the Rotor, Contamination, Ground Fault and Connections.

This instrument presents an exciting break-through in off-line (de-energized) testing. Within minutes the operator can get a complete picture of the condition of the motor without having to stress-test the windings or use other more expensive or elaborate instruments, which can he difficult to operate and analyze captured data with.

The instrument can be used in two modes: Static and Dynamic. Both quickly collect data in the auto mode and there is no need to operate a lot of difficult to understand buttons.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Using ALL-TEST IV PRO® Greatly Increases the Profitability of Your Plant! Predictive Maintenance Regular testing can identify developing faults before a failure occurs. All measurement data can be trended for predictive maintenance condition monitoring. By making proactive repairs and eliminating unscheduled down-time, plant productivity is greatly improved.

Quality Assurance
New motors of any size can be defective. Spares "on the shelf" are often unknowns. A 2-minute test can insure that your motor will run once you install it!

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
THE PERFECT TOOL FOR TROUBLE SHOOTING, START-UP & QUALITY CONTROL OF AC/DC ELECTRIC MOTORS, GENERATORS OR TRANSFORMERS

Trouble Shooting - Know in a few minutes what the problem is: electrical or mechanical, coil or rotor, internal fault or ground fault.
Start-up - Make sure all electrical motors are working in top condition.
Quality Assurance - Test all incoming motors
Light PdM - Also suited for limited, manual, Predictive Maintenance.