Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The Exothermics Mini Stainless Steel Heat Exchanger is the answer to heat recovery needs in systems with low air volumes. Designed specifically for systems with ACFM volumes of 300 to 5500 and temperatures up to 1200°F (649° C) , the Mini Heat Exchanger provides optimum heat recovery.

The removable access cover on the exhaust airstream makes it possible to clean the unit and maintain peak effectiveness.

The Exothermics Mini Stainless Steel Heat Exchanger is a fully welded assembly that provides structural and airstream integrity. This is accomplished with features such as a continuously welded primary seal that separates the two airstreams and fully welded end seals.

The Mini Heat Exchanger provides efficient heat recovery on multiple applications.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The Exothermics Aluminum Air-to-Air Heat Exchanger is a counter-flow design allowing for two segregated air streams to flow through the parallel plates within the exchanger. These exchangers utilize a state-of-the-art sinusoidal plate-type design for maximum heat transfer efficiency.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Exothermics’ TBR Tubular Heat Exchangers effectively reclaim heat from catalytic incinerators, furnaces, thermal oxidizers and many other high temperature process and environmental applications. They help lower energy costs by easily and effectively controlling process air temperatures and deliver a fast return on investment.

No other company manufactures a more effective tubular heat exchanger than Exothermics. Our units are installed in hundreds of sites around the world, and we are quickly becoming the preferred choice for high temperature heat recovery equipment. Our Tubular Heat Exchangers are accepted and endorsed worldwide because they simply perform better.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Exothermics' DSP Dimple Plate Heat Exchangers are fully-welded and can be manufactured in a wide variety of sizes. They can also be configured for counter-flow or cross-flow operation. In these exchangers the parallel plates are formed with either staggered or inline dimple patterns to reduce the potential for particulate fouling. The Dimple Plate Heat Exchanger can recover energy from an industrial exhaust with temperatures up to 1,200 oF (650 oC). The dimple plate design can be used for applications where the flows may include some particulate.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Extern-A-Therm Recuperators are compact tubular air-to-air heat exchangers designed to recover the waste heat in industrial exhaust gases. The recovered heat is used to preheat the combustion air for the system’s burners, thereby increasing the thermal efficiency. To ensure that all the wasted heat is drawn across the recuperator tubes, the recuperator is typically mated with an Eclipse eductor. The design of the Extern-A-Therm, housing and eductor ensure ease of installation and efficient use of existing pipe work. The housings are internally insulated; there is no need for additional external insulation

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Exothermics’ DIR Dimple Insulated Heat Exchangers are designed specifically for high temperature applications up to 1550oF (815oC). They feature a fully wrapped inner and outer case and 4 inch thick internal high temperature insulation. DIR Heat Exchangers are available in a wide variety of sizes and flow configurations, such as counter-flow or cross-flow, to satisfy your needs, whether you are recovering heat from your ovens, preheating combustion air, or running a catalytic or thermal oxidizer.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Eclipse Cross-Flow recuperators are compact tubular air-to-air heat exchangers designed to recover the waste heat in industrial exhaust gases. The recovered heat is used to preheat the combustion air for the system’s burners, thereby increasing the thermal efficiency. To ensure that all the wasted heat is drawn across the recuperator tubes the recuperator is typically mated with an Eclipse eductor. The single-ended design of the Cross-Flow recuperator allows for free expansion of the recuperator tubes; no expansion joints are required.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Exothermics SP Sinusoidal Plate Heat Exchangers are the flagship products of the Exothermics line. Our exclusive sinusoidal plate design provides maximum effectiveness and the highest performance available on the market today. High heat transfer effectiveness is produced by corrugating the heat transfer plates to achieve our proprietary sinusoidal wave pattern. The corrugated surface creates air flow turbulence as the air passes through the unit. Heat transfer is further enhanced by using a counter flow design. SP heat exchangers feature fully welded stainless steel construction for robust, durable performance, maximum efficiency and short payback time.