Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Catering for difficult connection applications

Extend a high pressure pipe
Retain the pressured oil while the injector is refilled
Connect to sleeves with oil injection preparations

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Efficient and correct dismounting

The unique design of the TMMS series allows the application of force on most efficient point; the inner ring, and thereby requiring less force for dismounting than when pulling on the outer ring
The firm grip behind the bearing's inner ring ensures that the pulling forces are only transmitted through the inner ring and not through the outer ring or the rolling elements, preventing bearing damage
The tri-section construction allows even force distribution, preventing bearing locking and/or tilting on the shaft, especially in the case of SRB and CARB®, during dismounting
Suitable for use in combination with any three-armed puller
Special wig shape allows the plates to be easily inserted between bearing and the shoulder on the shaft
Available in a wide range, covering most common shaft sizes

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The SKF advanced hydraulic spindle TMHS 8E effortlessly generates maximum force of 80 kN (8 tones imperial), facilitating the easy removal of bearings or other components. The spindle is equipped with an integrated hydraulic pump for force generation. The TMHS 8E is supplied with a nosepiece and three extension pieces, allowing easy and quick adaptation to the shaft's length.

Integrated hydraulic cylinder and pump - no separate pump is required
Safety valve prevents overloading the spindle and the puller it is used with in case excessive force is applied
The spring-loaded centre point allows easy centring of the puller on the shaft without damaging it

Features:

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Effortless force generation up to 50 kN (5 tons imp)

The SKF advanced hydraulic spindle TMHS 5E effortlessly generates maximum force of 50 kN (5 tones imperial), facilitating the easy dismounting of bearings or other components. The spindle is equipped with an integrated hydraulic pump for force generation. The TMHS 8E is supplied with a nosepiece and three extension pieces, allowing easy and quick adaptation to the shaft's length.

Integrated hydraulic cylinder and pump - no separate pump is required
Safety valve prevents overloading the spindle and the puller it is used with in case excessive force is applied
The spring-loaded centre point allows easy centring of the puller on the shaft without damaging it

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Hydraulic Pressure Gauges for SKF Hydraulic Pumps and Oil Injectors

Liquid filled and/or equipped with a restriction screw in order to absorb any sudden pressure drop and prevent damage
Safety glass and blowout discs are standard for all 100 mm (3.9 in) diameter gauges
All have dual scales (MPa/psi)
Covers pressures of 100 to 400 MPa (14,500 to 58,000 psi)

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
For accurate bearing clearance measurement

SKF feeler gauges (Part# 729865) are designed to measure the internal clearance when adjusting spherical roller bearings.

13 blades of 100 mm (4 in) length
High accuracy of measurement
Supplied with protective plastic cover

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Heat resistant gloves

The SKF heat resistant gloves are specially designed for the handling of heated bearings. They are made of special fabric to obtain the following combination of features:

Lint free Heat resistant up to 150 °C/302 °F
Cut resistant
Contains no asbestos
Tested and certified for mechanical hazards (EN 388) and thermal hazards (EN 407)