Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
30, 150 and 300 MPa - (4,350, 21,750 and 43,500 psi)

The THAP air-driven pumps are available in three different pressure versions. They are used for mounting and dismounting OK couplings, for dismounting large pressure joints such as bearings, flywheels, couplings, railway wheels and in many similar applications. The pumps consist of a high pressure hydraulic pump, driven by an air piston. The units are supplied in a sturdy case including oil suction and return hoses with quick connect couplings. The pumps can also be supplied in complete sets which consists of pump, pressure gauge, adapter block, high pressure pipe and connection nipples.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
150 MPa - (21,750 psi)

The 728619E is a two-stage pump suitable for use with SKF Supergrip bolts and for the mounting and dismounting of bearings or components where a maximum pressure of 150 MPa (21,750 psi) is required. The pump is supplied with a 3 000 mm (118 in) pressure hose, quick connect coupling and mating nipple and pressure gauge. The pump is filled with SKF mounting fluid LHMF 300, is supplied with an extra litre and is protected in a sturdy metal case.

Two stage pressure pumping
Extra litre of mounting fluid
Packed in a sturdy protective metal case

Applications

SKF Supergrip bolts
All other oil injection applications where the maximum pressure is 150 MPa (21,750 psi)

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
100 MPa - (14,500 psi)

Suitable for hydraulic nuts smaller than or equal to HMV 54E
Extra litre of mounting fluid
Special pump configurations available
Packed in a sturdy protective case

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Large oil container 100 MPa - (14,500 psi) hydraulic nut pump

The TMJL 100 pump is suitable for use with hydraulic nuts (smaller than or equal to HMV 92E) and for mounting and dismounting bearings or components where a maximum pressure of 100 MPa (14,500 psi) is required.
The pump is supplied with 3000 mm (118 in) pressure hose, quick connect coupling and mating nipple, and pressure gauge.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
50 MPa - (7,250 psi) OK coupling Pump

The TMJL 50 pump is mainly intended for use on the low pressure side of SKF OK couplings, but is also suitable for applications where a maximum pressure of 50 MPa (7,250 psi) is required.
The pump is supplied with a 3 000 mm (118 in) long high pressure hose with quick connect coupling and mating nipple.