Giá: Liên hệ
Khuyến mãi:
Thông tin sản phẩm: 150 mm (6”) rigid extension
Thông tin sản phẩm: 300 mm (12”) flexible ‘set in place’ metal extension
Thông tin sản phẩm: A 360° swivel supplied either separately or with the B2 Booster Gun. Threads 1/8” NPT (M) x ¼” NPT (F).
Thông tin sản phẩm: An 110 mm (4 ¼”) needlepoint coupler with a 90° bend at the end.
Thông tin sản phẩm: Small needle used to inject sealed bearings and small lubrication points with grease when no grease nipples are present. Length 64 mm (2 ½”).
Thông tin sản phẩm: A similar coupler to the KZE but fitted with a rigid extension. Length 200 mm (8”).
Thông tin sản phẩm: Push on needlepoint grease extension, ideal for use with four wheel drive vehicles. Length 300 mm (12”)
Thông tin sản phẩm: Push on needlepoint extension with j bend at the end. Ideal for use with aircrafts. Length 300 mm (12”)
Thông tin sản phẩm: Push on needle point grease extension with 45° angle at the end. Ideal for use with aircrafts. Length 300 mm (12”)
Thông tin sản phẩm: Ideal for use on bearings fitted with rubber dust covers. Length 130 mm (5 1/8”).
Thông tin sản phẩm: Used when vehicles are fitted with special nipples or, in some cases, when normal nipples are damaged. Length 60 mm (2 ¼”).
Thông tin sản phẩm: Ideal for greasing the bearings on four wheel drive vehicles. Length 120 mm (4 ¾”
Thông tin sản phẩm: Standard SUPERGRIP coupler supplied with all Macnaught grease guns. Designed to fit most grease nipples and grease guns. Can be purchased separately or in packets of 8 (KY-8). Threads 1/8” BSP
Thông tin sản phẩm: Used when nipples are recessed and standard couplers would meet with interference from surrounding components (universal joints, etc). Length 93 mm (3 ¾”).
Thông tin sản phẩm: A slightly shorter version of the KDR. Along with the KDN and KDR, it can be used with a flexible extension.
Thông tin sản phẩm: For use in spaces when the area above the nipple is limited.
Thông tin sản phẩm: Helps to prevent nipples from breaking off and couplers from splitting. Recommended for use with the K7 MINILUBE®, P3 POWERLUBE®, and P6 and P8 MAXILUBE®.
Thông tin sản phẩm: For use on plant and machinery fitted with 7/8” buttonhead nipples. Length 85 mm (3 3/8”)