Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Extra large induction heater. High efficiency, energy saving induction heater with a 1200 kg bearing heating capacity.

High heater efficiency saves energy
Bearings and work pieces can be heated vertically or horizontally.
Easy bearing loading thanks to an ergonomically designed sliding yoke.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
NOTE: Please contact us for quote on EasyTherm-100 Bearing Heater.

The Easytherm 100 is robust and a powerful 400 Volt stationary microprocessor controlled induction heater. To be used for the professional mounting of a range of heavy parts including bearings, typically in maintenance shops and production areas for instance paper-mills and steel-mills. When press mounting is not an option the TM heater offers the solution.

"TURBO-BOOST" In the horizontal position the part will heat up twice as fast.

Advantage of induction heating:

Fast and controllable heating process
Safe heating process:
- Only workpiece is heated
- No messing around with dangerous hot oil
- No risk of (local) over heating
Suitable for ee or ZZ bearings (no risk of grease leakage)
Can be used with bearings with polyamide cages
No deforming of the bore of the workpiece

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

The EASYTHERM 30 is powerful 12.8 kW induction heater with an ergonomic pivoting yoke. Since the EasyTherm 30 induction heater is microprocessor controlled, a temperature transfer can be implemented within 2 degrees celsius of desired temp. or timed to a fraction of a second. The unit is customizable, in the fact that, you specify voltage, yoke crossbars, and any extensions needed. With the right configuration, this induction heater can accommodate bearing assemblies, and other parts, over a meter in diameter. Upon completion of heating, no more than 2 A/cm of residual magnetism is left behind.

"TURBO-BOOST" - In the horizontal position the part will heat up twice as fast.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


The Easy therm 60 is a robust powerful 400 Volt stationary microprocessor controlled induction heater, to be used for the professional mounting of heavy parts including bearings, typically used in maintenance shops and production areas. With easy to fit lift installation and rail system for the parts, the Easy therm 60 can be assembled to an ergonomic production machine.

"TURBO-BOOST" In the horizontal position the part will heat Up twice as fast.

Advantage of induction heating:

Fast and controllable heating process
Safe heating process:
- Only workpiece is heated
- No messing around with dangerous hot oil
- No risk of (local) over heating
Suitable for ee or ZZ bearings (no risk of grease leakage)
Can be used with bearings with polyamide cages
No deforming of the bore of the workpiece

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Large bearing heater with high heating capacity of up to 300 kg bearing
The SKF large induction heater TIH 220m is a reliable and robust induction heater from the SKF TIH...m range suitable for heating bearings up to a maximum weight of 300 kg (660 lbs) and solid components up to a maximum weight of 150 kg (330 lbs). Advanced design of the power electronics including current and overheating control, combined with user friendly features such as sliding arms and remote control are standard to the TIH...m range.

Maximum efficiency is achieved by placing the induction coil outside the heater's housing, in the centre of the bearing, resulting in shorter heating time and lower energy consumption. The LED operating display and control panel are integrated in a remote control, which makes the heater easy to use. To suit different operating voltages worldwide, the TIH 220m is available in different voltage variants.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Large bearing heater with high heating capacity of up to 300 kg bearing
The SKF large induction heater TIH 220m is a reliable and robust induction heater from the SKF TIH...m range suitable for heating bearings up to a maximum weight of 300 kg (660 lbs) and solid components up to a maximum weight of 150 kg (330 lbs). Advanced design of the power electronics including current and overheating control, combined with user friendly features such as sliding arms and remote control are standard to the TIH...m range.

Maximum efficiency is achieved by placing the induction coil outside the heater's housing, in the centre of the bearing, resulting in shorter heating time and lower energy consumption. The LED operating display and control panel are integrated in a remote control, which makes the heater easy to use. To suit different operating voltages worldwide, the TIH 220m is available in different voltage variants.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
EasyTherm 15 (12.8kVA) Induction Bearing Heater can handle bearing assemblies up to 180kg

Up to 515mm Diameter; 815mm with Optional Adapter
Digitally Controlled Heater
Available to in Voltages from 380 to 480

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

The SKF medium induction heater TIH 100m has the same high standards of efficiency and performance as the smaller heater TIH 030m, combined with increased capacity. The advanced design of the power electronics allows features of accurate electric current control, cut-outs to avoid overheating, controls on rate of temperature increase, these are as some of the standard features in the TIH...m range.

Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 120 kg (264 lb). The heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 100m is equipped with a time mode for heating components other than bearings. The heater is supplied standard with three yokes and is available in two executions:

230V/50-60Hz or
400-460V/50-60Hz

View Product Video

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features:
The Easytherm 3.5 is a powerful stationary microprocessor controlled induction heater with an ergonomic pivoting yoke. To be used for the professional mounting of a range of parts including bearings, typically used in maintenance shops and production areas. The Easytherm 3.5 is also available without pivoting yoke.

"TURBO-BOOST" - In the horizontal position the part will heat up twice as fast.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Small bearing heater with high heating capacity of up to 40 kg bearings

Compact lightweight design facilitating portability
2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption
Capable of heating a 28 kg (61.7 lb) bearing in just 20 minutes
Automatic demagnetization
115 and 230 VAC versions

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


A portable induction bearing heater weighing only 4.5 kg (10 lbs)

SKF TMBH 1 SCORPIO Portable Induction Bearing Heater

The SKF bearing heater TMBH 1 is a portable lightweight heater for heating bearings with an inner diameter ranging from 20 to 100 mm (0.8 to 4 in) and a maximum corresponding weight of 4 to 5 kg (9 to 11 lb). The heater uses a patented method of heating based on high frequency induction, which provides optimized efficiency. Additionally, this method is very quiet and creates no magnetization at all. In addition to bearings, the heater can also be used for heating metal components such as gears, pulleys, bushings and shrink rings.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Our Price: $1200.00
The Easytherm 1 is a small powerful microprocessor controlled induction heater for heating of small sized components including bearings up to 22 lb. (10 kg)!! It is easy to use and portable. Comes complete with a robust case and is easy to use on location.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Professional heating device especially designed for pre-heating small bearings prior to mounting

Thermostat controlled
Adjustable temperature range of 50 - 200 °C (120 - 390 °F)
Protective cover to avoid contamination during heating

Technical data

Designation:
729659 C/110V - 115VAC (50/60Hz)
Power: 1,000 W
Temperature range: 50°-200°C (120°-390°F)
Plate dimensions (l x w): 380 x 178 mm (15 x 7 in)
Height of cover: 50 mm (2 in)
Overall dimensions (l x w x d): 400 x 240 x 130 mm (16 x 10 x 5 in)
Weight: 4.7 kg (10 lb)
Length of connection cable: 2 metres (6.6 ft) (earth connection required)

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Cone Mount Bearing Heaters are the most reliable, flexible and cost-effective bearing heater on the market.
Starting at $479.00

250°F temperature indicator crayon
Aluminum cone for fast, even heat transfer
Made in USA and readily available from stock
Available in 120V or 220/240V