Máy gia nhệt vòng bi

HotLine (04)-2242 8148

Thiết bị đo điện đa năng

Tìm kiếm
Sản phẩm được quan tâm

Trang chủ > Kiểm Tra Và Bảo Trì > Tháo Lắp Vòng Bi > Máy gia nhệt vòng bi

Sắp xếp theo

- SKF Extra Large Induction Heater TIH L series
- Mã SP: SKF EXTRA LARGE
- Lượt xem: 4310
- Tình trạng:
- Extra large induction heater. High efficiency, energy saving induction heater with a 1200 kg bearing heating capacity.
  
  High heater efficiency saves energy
  Bearings and work pieces can be heated vertically or horizontally.
  Easy bearing loading thanks to an ergonomically designed sliding yoke.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- TMI-EasyTherm 100/ Call For Pricing
- Mã SP:
- Lượt xem: 4260
- Tình trạng:
- NOTE: Please contact us for quote on EasyTherm-100 Bearing Heater.
  
  The Easytherm 100 is robust and a powerful 400 Volt stationary microprocessor controlled induction heater. To be used for the professional mounting of a range of heavy parts including bearings, typically in maintenance shops and production areas for instance paper-mills and steel-mills. When press mounting is not an option the TM heater offers the solution.
  
  "TURBO-BOOST" In the horizontal position the part will heat up twice as fast.
  
  Advantage of induction heating:
  
  Fast and controllable heating process
  Safe heating process:
  - Only workpiece is heated
  - No messing around with dangerous hot oil
  - No risk of (local) over heating
  Suitable for ee or ZZ bearings (no risk of grease leakage)
  Can be used with bearings with polyamide cages
  No deforming of the bore of the workpiece
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- TMI-EasyTherm 30 Industrial Induction Bearing Heater/w Trolley
- Mã SP: TMI-EASYTHERM 30 INDUSTRIAL
- Lượt xem: 4112
- Tình trạng:
- The EASYTHERM 30 is powerful 12.8 kW induction heater with an ergonomic pivoting yoke. Since the EasyTherm 30 induction heater is microprocessor controlled, a temperature transfer can be implemented within 2 degrees celsius of desired temp. or timed to a fraction of a second. The unit is customizable, in the fact that, you specify voltage, yoke crossbars, and any extensions needed. With the right configuration, this induction heater can accommodate bearing assemblies, and other parts, over a meter in diameter. Upon completion of heating, no more than 2 A/cm of residual magnetism is left behind.
  
  "TURBO-BOOST" - In the horizontal position the part will heat up twice as fast.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- TMI-EasyTherm 60/ Call for Pricing
- Mã SP: TMI-EASYTHERM 60
- Lượt xem: 4329
- Tình trạng:
- The Easy therm 60 is a robust powerful 400 Volt stationary microprocessor controlled induction heater, to be used for the professional mounting of heavy parts including bearings, typically used in maintenance shops and production areas. With easy to fit lift installation and rail system for the parts, the Easy therm 60 can be assembled to an ergonomic production machine.
  
  "TURBO-BOOST" In the horizontal position the part will heat Up twice as fast.
  
  Advantage of induction heating:
  
  Fast and controllable heating process
  Safe heating process:
  - Only workpiece is heated
  - No messing around with dangerous hot oil
  - No risk of (local) over heating
  Suitable for ee or ZZ bearings (no risk of grease leakage)
  Can be used with bearings with polyamide cages
  No deforming of the bore of the workpiece
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF-TIH 220M/LV Industrial Induction Heater
- Mã SP: SKF-TIH 220M/LV
- Lượt xem: 4258
- Tình trạng:
- Large bearing heater with high heating capacity of up to 300 kg bearing
  The SKF large induction heater TIH 220m is a reliable and robust induction heater from the SKF TIH...m range suitable for heating bearings up to a maximum weight of 300 kg (660 lbs) and solid components up to a maximum weight of 150 kg (330 lbs). Advanced design of the power electronics including current and overheating control, combined with user friendly features such as sliding arms and remote control are standard to the TIH...m range.
  
  Maximum efficiency is achieved by placing the induction coil outside the heater's housing, in the centre of the bearing, resulting in shorter heating time and lower energy consumption. The LED operating display and control panel are integrated in a remote control, which makes the heater easy to use. To suit different operating voltages worldwide, the TIH 220m is available in different voltage variants.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF-TIH 220M/US Industrial Induction Heater
- Mã SP: SKF-TIH 220M/US
- Lượt xem: 4417
- Tình trạng:
- Large bearing heater with high heating capacity of up to 300 kg bearing
  The SKF large induction heater TIH 220m is a reliable and robust induction heater from the SKF TIH...m range suitable for heating bearings up to a maximum weight of 300 kg (660 lbs) and solid components up to a maximum weight of 150 kg (330 lbs). Advanced design of the power electronics including current and overheating control, combined with user friendly features such as sliding arms and remote control are standard to the TIH...m range.
  
  Maximum efficiency is achieved by placing the induction coil outside the heater's housing, in the centre of the bearing, resulting in shorter heating time and lower energy consumption. The LED operating display and control panel are integrated in a remote control, which makes the heater easy to use. To suit different operating voltages worldwide, the TIH 220m is available in different voltage variants.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- TMI-EasyTherm 15 High Power Induction Bearing Heater
- Mã SP: TMI-EASYTHERM 15 HIGH POWER
- Lượt xem: 4104
- Tình trạng:
- EasyTherm 15 (12.8kVA) Induction Bearing Heater can handle bearing assemblies up to 180kg
  
  Up to 515mm Diameter; 815mm with Optional Adapter
  Digitally Controlled Heater
  Available to in Voltages from 380 to 480
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TIH 100m Induction Heater
- Mã SP: SKF TIH 100M INDUCTION HEATER
- Lượt xem: 4817
- Tình trạng:
- The SKF medium induction heater TIH 100m has the same high standards of efficiency and performance as the smaller heater TIH 030m, combined with increased capacity. The advanced design of the power electronics allows features of accurate electric current control, cut-outs to avoid overheating, controls on rate of temperature increase, these are as some of the standard features in the TIH...m range.
  
  Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 120 kg (264 lb). The heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 100m is equipped with a time mode for heating components other than bearings. The heater is supplied standard with three yokes and is available in two executions:
  
  230V/50-60Hz or
  400-460V/50-60Hz
  
  View Product Video
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- TMI-EasyTherm 3.5 Stationary Induction Bearing Heater 120/220VAC
- Mã SP: TMI-EASYTHERM 3.5 STATIONARY
- Lượt xem: 4166
- Tình trạng:
- Features:
  The Easytherm 3.5 is a powerful stationary microprocessor controlled induction heater with an ergonomic pivoting yoke. To be used for the professional mounting of a range of parts including bearings, typically used in maintenance shops and production areas. The Easytherm 3.5 is also available without pivoting yoke.
  
  "TURBO-BOOST" - In the horizontal position the part will heat up twice as fast.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TIH 030m Portable Induction Heaters
- Mã SP: SKF TIH 030M
- Lượt xem: 4315
- Tình trạng:
- Small bearing heater with high heating capacity of up to 40 kg bearings
  
  Compact lightweight design facilitating portability
  2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption
  Capable of heating a 28 kg (61.7 lb) bearing in just 20 minutes
  Automatic demagnetization
  115 and 230 VAC versions
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TMBH 1 SCORPIO Portable Induction Bearing Heater
- Mã SP: SKF TMBH 1 SCORPIO
- Lượt xem: 4020
- Tình trạng:
- A portable induction bearing heater weighing only 4.5 kg (10 lbs)
  
  SKF TMBH 1 SCORPIO Portable Induction Bearing Heater
  
  The SKF bearing heater TMBH 1 is a portable lightweight heater for heating bearings with an inner diameter ranging from 20 to 100 mm (0.8 to 4 in) and a maximum corresponding weight of 4 to 5 kg (9 to 11 lb). The heater uses a patented method of heating based on high frequency induction, which provides optimized efficiency. Additionally, this method is very quiet and creates no magnetization at all. In addition to bearings, the heater can also be used for heating metal components such as gears, pulleys, bushings and shrink rings.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- TMI-Easytherm 1 Induction Heater 110VAC/230VAC
- Mã SP: TMI-EASYTHERM
- Lượt xem: 4417
- Tình trạng:
- Our Price: $1200.00
  The Easytherm 1 is a small powerful microprocessor controlled induction heater for heating of small sized components including bearings up to 22 lb. (10 kg)!! It is easy to use and portable. Comes complete with a robust case and is easy to use on location.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF-729659 C Electric Hot Plate Bearing Heater
- Mã SP: SKF-729659
- Lượt xem: 4242
- Tình trạng:
- Professional heating device especially designed for pre-heating small bearings prior to mounting
  
  Thermostat controlled
  Adjustable temperature range of 50 - 200 °C (120 - 390 °F)
  Protective cover to avoid contamination during heating
  
  Technical data
  
  Designation:
  729659 C/110V - 115VAC (50/60Hz)
  Power: 1,000 W
  Temperature range: 50°-200°C (120°-390°F)
  Plate dimensions (l x w): 380 x 178 mm (15 x 7 in)
  Height of cover: 50 mm (2 in)
  Overall dimensions (l x w x d): 400 x 240 x 130 mm (16 x 10 x 5 in)
  Weight: 4.7 kg (10 lb)
  Length of connection cable: 2 metres (6.6 ft) (earth connection required)
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Cone Mount Bearing Heaters
- Mã SP: CONE MOUNT BEARING HEATERS
- Lượt xem: 4263
- Tình trạng:
- Cone Mount Bearing Heaters are the most reliable, flexible and cost-effective bearing heater on the market.
  Starting at $479.00
  
  250°F temperature indicator crayon
  Aluminum cone for fast, even heat transfer
  Made in USA and readily available from stock
  Available in 120V or 220/240V
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :