Trang chủ > Kiểm Tra Và Bảo Trì > Tháo Lắp Vòng Bi > Máy gia nhệt vòng bi

SKF TIH 100m Induction Heater

Có: 0 sản phẩm trong giỏ

Mã SP: SKF TIH 100M INDUCTION HEATER
Giá NY: Liên hệ
Giá bán: Liên hệ
Tình trạng:
Khuyến mãi:
Lượt xem: 5121
The SKF medium induction heater TIH 100m has the same high standards of efficiency and performance as the smaller heater TIH 030m, combined with increased capacity. The advanced design of the power electronics allows features of accurate electric current control, cut-outs to avoid overheating, controls on rate of temperature increase, these are as some of the standard features in the TIH...m range.

Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 120 kg (264 lb). The heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 100m is equipped with a time mode for heating components other than bearings. The heater is supplied standard with three yokes and is available in two executions:

230V/50-60Hz or
400-460V/50-60Hz

View Product Video
Tags: Bàn Map

Đơn vị tiền tệ

Số lượng:
Thành tiền

	Induction coil outside the heater?s housing allows shorter heating time and lower energy consumption
	Foldable bearing support arms facilitate the heating of larger diameter bearings
	Magnetic temperature probe helps prevent bearing overheating
	Easy-to-use control panel and LED display integrated in a remote control
	Internal storage for all 3 yokes reduces the risk of yoke damage or loss
	Integrated carrying handle facilitates portability
	Swivel arm

Standard swivel arm for large size yoke
Capable of heating a 97 kg (213 lb) bearing in less than 20 minutes, saving time and energy
2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption
Temperature mode pre-set at 110 °C (230 °F) to help prevent bearing over?heating

Automatic demagnetisation 3 years warranty SKF m₂₀ concept "m20" represents the weight (kg) of the heaviest SRB 231 bearing which can be heated from 20 to 110 °C (68 to 230 °F) in 20 minutes. This defines the heater?s power output instead of its power consumption.

Technical data

SKF m₂₀ performance: 97 kg (213 lb)
Voltage, V/Hz:
- 230V/50-60Hz or
- 400-460V/50-60Hz
Work piece:
- Maximum weight: 120 kg (264 lb)
- Maximum bore diameter: 20 - 400 mm (0,8 - 15,7 in)
Temperature control:
- Range: 0 - 250 °C (32 - 482 °F)
- Magnetic probe: Yes, K-type
- Accuracy (electronics): ñ 2 °C (ñ 3.6 °F)
Time control:
- Range: 0 - 60 minutes
- Accuracy: ± 0.01 sec.
Maximum temperature (approx.): 400 °C (750 °F)
Thermometer mode: Yes
Bearing mode: Yes
Power reduction: 2-step; 50 - 100%
Demagnetisation according to SKF norms (automatic): Yes (<2 A/cm)
Can heat sealed bearings: Yes
Can heat pre-greased bearings: Yes
Error guiding codes: Yes
Thermal overload protection: Yes
Maximum magnetic flux: 1,7 T
Control panel: Key board with LED in remote control
Operating area (w x h): 155 x 205 mm (6,1 x 8,0 in)
Coil diameter: 110 mm (4,3 in)
Dimensions (w x d x h): 570 x 230 x 350 mm (22.4 x 9.0 x 13.7 in)
Total weight, including yokes 42 kg (92 lb)
Maximum power consumption:
- 3.6 kVA (230V)
- 4.0-4.6 kVA (400-460V)
Number of standard: yokes 3
Standard yokes:
- 56 x 56 x 296 mm (2,2 x 2,2 x 11,7 in), for heating bearings with bore diameter of 80 mm (3.1 in) and larger
- 28 x 28 x 296 mm (1,1 x 1,1 x 11,7 in), for heating bearings with bore diameter of 40 mm (1.6 in) and larger
- 14 x 14 x 296 mm (0,6 x 0,6 x 11,7 in), for heating bearings with bore diameter of 20 mm (0.8 in) and larger
Core cross section: 56 x 56 mm (2,2 x 2,2 in)
Yoke storage: Yes, foldable
Sliding arm No Swivel arm: Yes, large yoke only
Cooling fan: No
Housing material: Steel and glass filled polyamide
Warranty period - 3 years