Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

The CMCP-260 junction boxes are connecting centers for terminating the outputs of accelerometers or other transducer field wiring. The CMCP-260 is constructed of molded NEMA 4X fiberglass, NEMA 4 painted steel, or NEMA 4X Stainless Steel. Oil resistant "O" Ring gaskets are also a standard feature.

CMCP-260 enclosures only contain a back panel, no terminations are provided.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

The CMCP261 Liquid Tight Strain Relief Connectors are used for making direct accelerometer or transducer extension cable entries into the junction boxes listed above. Long cable runs or cables other than the actual extension cable should be installed in conduit.

Constructed of Polyamide
Providing both:
Environmental sealing
-and-
Strain relief
Temperature rated to -40° to 212° F (-60° to 100° C).
Pressure rating of up to 150 PSIG.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The CMCP-265 series Termination Junction Boxes are multiple channel connecting centers for terminating the outputs of accelerometers or other transducer field wiring. Crew Clamp DIN Rail Mounted terminals are provided for the intermediate termination of Accelerometers, Proximity Probes, Speed Sensors, RTD?s, and other transducers. Three terminals are provided per channel.

Fiberglass boxes are light gray in color and are provided with mounting feet and stainless steel mounting screws. Also available in Painted Steel and Stainless Steel. Fiberglass and Stainless Steel boxes are rated NEMA 4X.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The CMCP312 provides a switchable BNC output for up to 12 Accelerometers, and easy access for connecting Data Collectors and Analyzers. The CMCP312 small size allows it to be mounted almost anywhere.The CMCP312 mounts on Standard 35 mm DIN Rail and Accelerometers are easily attached using the provided screw terminals. The CMCP312 is for Interior Mounting, if mounted outdoors a suitable Junction Box should be used.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The CMCP305 Quick Access series BNC boxes are a low cost solution to adding a local measurement point to your maintenance route. The polycarbonate enclosure is rated for Nema 4, Nema 4X and IP67. The "screw type" terminals can handle up to 16 awg wire and are mounted on the lid, leaving the base of the enclosure for wiring. The CMCP305 is available in 2 and 4 channels with optional CMCP261-01 Liquid Tight Strain Relief Connectors pre-installed. STI's wide variety of BNC and Switch boxes are designed to bring the measurement point to you, keeping you out of the way of moving parts and saving you time from having to walk to each location. For another low cost solution, add our CMCP1100 Accelerometers to this system to keep your costs down so more can be done on other machines

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
BNC Junction Boxes For Easy Remote Access To Accelerometers

Individual BNC connection for each accelerometer
1, 2, 4 and 6 Channel (Custom on Request)
Oil resistant "O" Ring gasket
Nema 4x, IP66
Available in Fiberglass, Painted Steel and Stainless Steel
Engraved tagging for channel identification

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm: