CNC Surface and Contour Measuring Station for Shafts

Có: 0 sản phẩm trong giỏ

CNC Surface and Contour Measuring Station for Shafts
  • Mã SP: CB0MA- FGN
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 4309
  • There is an increasing trend towards automated surface and contour measuring.

    Positioning the probe system to the measuring point on small workpieces usually takes place by moving or turning the workpiece.

    For larger or longer and heavier components, it is more advantageous to move the measuring element to the measuring point of the workpiece and not the other way around.

    The measuring station "XP 20 V2 CNC, Model 6" described here provides the solution to your surface and contour measurement tasks on shafts.
    Especially camshafts and crankshafts can be measured up to a length of 800 mm (31.5 in) and a diameter of 300 mm (11.8 in).
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền
There is an increasing trend towards automated surface and contour measuring.

Positioning the probe system to the measuring point on small workpieces usually takes place by moving or turning the workpiece.

For larger or longer and heavier components, it is more advantageous to move the measuring element to the measuring point of the workpiece and not the other way around.

The measuring station "XP 20 V2 CNC, Model 6" described here provides the solution to your surface and contour measurement tasks on shafts. 
Especially camshafts and crankshafts can be measured up to a length of 800 mm (31.5 in) and a diameter of 300 mm (11.8 in).


Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-