Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Motorized control valves for throttling, mixing and diverting of liquids and gases

Two-way and three-way design
Optimum control by adjusted cone assemblies
Various cone designs
Body material made of GG 25, GGG 40.3, GS-C 25, 1.4408
ANSI - Control valves in 2-way design, Material A216 WCB 1“,1½ “, 2 “, 2 ½ “, 3“, 4“, 6“ , Class 150 and class 300 for Electric and pneumatic actuators

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Motorized control valves for throttling, mixing and diverting of liquids and gases

Two-way and three-way design
Optimum control by adjusted cone assemblies
Various cone designs
Body material made of GG 25, GGG 40.3, GS-C 25, 1.4408

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Series MV 5270 / PV 6270, MV 5200/PV 6200, MV 5300/PV 6300, MV 5400/PV 6400

Nominal diameter DN 20...300
Three-way design
Three-way design with short B-flange
Spindle packing with chevron rings or long life torsion safe chambered bellows seal
Easy to change actuator orientation for operation and cabling access
Optimum control by adjusted cone assemblies
Various cone designs
ANSI - Control valves in 3-way design

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Series ST 6150

approved by German Technical Inspectorate (TÜV) as an actuator for water and steam with safety function in heating systems
closes at power failure or hazard
closes smoothly even at large differential pressures
adjustable closing time for ST 6152
automatic return to closed loop control possible

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Series MV 5051 / PV 6051

Steam pressure reduction and cooling in one unit
Low-noise perforated cone
Water injection from below
Wide control range

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Series MV 5211

Nominal diameter DN 15...50
Nominal pressure PN 16...160
Restitant materials for cone assembly
Optimum control by adjusted cone assemblies
Body material made of GS-C 25, GS 17, CrMo 55, stainless steel

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Series MV 5291 / MV 5391

boiler-feed pump securely protected for falling below the minimum flow rate
adjustable recirculation flow rate
perforated cone for feed-water control
for boiler steam ratings 5...50 t/h
nominal size DN 25..DN 50, DN 80
nominal pressure PN 40

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Series MV 5291

Nominal diameter DN 15...25
nominal pressure PN 40
Two-way design with / without sample valve
Hardened cone and seat for low wear operation
body material made of GS-C 25
Parabolic cone with linerar characteristic for exact dosing of blowdown flowrate

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Series HV 6291 / PV 6291

Nominal diameter DN 20...65
nominal pressure PN 40
maintenance free spindle packing
clear flow through valve
protection of spindle packing by back sealing
easy replacement of cone

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Series KV / HV 6595

Nominal diameter DN 25-50
Nominal pressure PN 40
No stuffing box insulation towards the outside
No compressed air connection nessesary
Absolut impermeability towards the outside
Adjustable opening and closing times
No wearing parts

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Series MV 52-/5341 / PV 62-/6341

Nominal width DN 50 ... 150
Nominal pressure PN 16 ... 40
Three-way design
Kvs value adjustable in gate B
Cone can be rotated 80°
Vacuum-resistant on circulation side
Circulation cone assy adapted for cavitation
Valve housing made from GJS-400-18-LT, GP-240 GH, 1.4408

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Series MV 5311, MV 5411 / PV 6311, PV 6411

Nominal diameter DN 100...400 NPS 4"...6"
Nominal pressure PN 16 ... 160, #150...#300
Two-Way
Valve body materials JS-1025 (GJS-400-18LT), 1.0619 (GP-240-GH), 1.4408 (GX-5CrNiMo 19-11-2-), 1.7357 (G17CrMo5-5), A 216 WCB