Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
ALL-TEST PRO® 33 Industrial

Check and test your electric motors easily with the All-Test PRO AT33 Industrial

The AT33IND instrument is the PERFECT TOOL for troubleshooting, inspection of incoming or stored motors before installation or repair and shows the complete condition of the Stator Windings, the Rotor, Contamination, Ground Fault and Connections.

This instrument presents an exciting break-through in off-line (de-energized) testing. Within minutes the operator can get a complete picture of the condition of the motor without having to stress-test the windings or use other more expensive or elaborate instruments, which can he difficult to operate and analyze captured data with.

The instrument can be used in two modes: Static and Dynamic. Both quickly collect data in the auto mode and there is no need to operate a lot of difficult to understand buttons.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Using ALL-TEST IV PRO® Greatly Increases the Profitability of Your Plant! Predictive Maintenance Regular testing can identify developing faults before a failure occurs. All measurement data can be trended for predictive maintenance condition monitoring. By making proactive repairs and eliminating unscheduled down-time, plant productivity is greatly improved.

Quality Assurance
New motors of any size can be defective. Spares "on the shelf" are often unknowns. A 2-minute test can insure that your motor will run once you install it!

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
THE PERFECT TOOL FOR TROUBLE SHOOTING, START-UP & QUALITY CONTROL OF AC/DC ELECTRIC MOTORS, GENERATORS OR TRANSFORMERS

Trouble Shooting - Know in a few minutes what the problem is: electrical or mechanical, coil or rotor, internal fault or ground fault.
Start-up - Make sure all electrical motors are working in top condition.
Quality Assurance - Test all incoming motors
Light PdM - Also suited for limited, manual, Predictive Maintenance.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features

Four terminal Kelvin measurements
Over-temperature and over-voltage protection
5 ranges with 100microohms max resolution
Large 2000 count LCD display
Auto Hold and Auto Off features
20V test voltage
Invalid test indicators prevent inaccurate measurements
Built-in water resistant case with shoulder strap
Complete with 8AA batteries, and 2 sets of test leads (4 wire with alligator clips and 4 wire with 2 Kelvin alligator clips)

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features

7 ranges for wide 20.00mohms to 20.00kohms low resistance measurements
High resolution to 0.01mohms
1999 count display with large 0.8" digits
4 wire test cable with Kelvin clip connectors
Automatic zero
Built-in comparator for Hi/Lo/Go resistance testing or selection
Complete with 4 wire cables with Kelvin clip connectors and power cord

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Features

7 ranges for wide 20.00mohms to 20.00kohms low resistance measurements
High resolution to 0.01mohms
1999 count display with large 0.8" digits
4 wire test cable with Kelvin clip connectors
Automatic zero
Built in comparator for Hi/Lo/Go resistance testing or selection
Complete with 4 wire cables with Kelvin clip connectors and power cord

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Precision Milliohm Meter (220VAC)

Portable Milliohm Meter Provides Resolution To 100æΩ
High accuracy and performance for low resistance measurements
Large 0.7" (18mm) LCD 1999 count
4-wire cables with Kelvin clip connectors
Manual zero display adjust
Overrange indication
Compact, durable field service

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Precision Milliohm Meter (110 VAC)

Portable Milliohm Meter Provides Resolution To 100µΩ
High accuracy and performance for low resistance measurements
Large 0.7" (18mm) LCD 1999 count
4-wire cables with Kelvin clip connectors
Manual zero display adjust
Overrange indication
Compact, durable field service

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Features

Large dual 4000 count backlit LCD and fast 50 segment analog display
Measure Insulation Resistance to 4000Mohm with 1kohm resolution and 1mA test current
Datalogging function stores up to 16,000 readings with single store or a programmable rate of 1 to 65,000 seconds per sample
Audible continuity
+/-3.0% reading basic insulation resistance accuracy
3 minute test lock function for convenience and efficiency
600V Overload Protection
Data Hold
AC Voltage function
RS-232 PC interface with Windows 95/98/NT/2000/ME/XP compatible Data Acquisition Software
Open circuit, overrange and low battery indications
Meter is built into rugged case with cover
Complete with built-in carrying case with test leads, alligator clips, RS-232 PC cable, software, neck strap and 8AA batteries

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features

1mA test current ensures 1000V/500V/250V rated test Voltage
Three test ranges:
2000Mohms/1000VDC
200Mohm/500VDC
200Mohms/250VDC
Safety Power Lock enables hands free operation for 3 minute test
Automatic discharge when safety "Press to Test" button is released
Auto power off and Data Hold
Large 0.65" LCD display
Automatic zero adjustment
Full function indication
Overload protection
Measures Resistance to 200 Ohms plus Volts to 750 VAC
Fast response for both Continuity and low Resistance testing
Complete with 6 AA 1.5V batteries, heavy duty 30" test leads, alligator clip, large probe, and case with neck strap

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Provides All Electrical Testing Tools Needed for Installation and Repair of Electrical Systems, HVAC Equipment and Large Appliances

Includes:

EX430 True RMS autoranging digital multimeter
MA200 400A clamp meter
40130 Non-Contact voltage detector
Set of CAT III-1000V test leads
Type K thermocouple bead probe
Type K to Banana Input Adaptor
Supplied in an attractive storage case
provides protection and organization for the meters

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R) with the secondary parameter of Q (quality), D (dissipation) or R (resistance)
Set Hi/Lo limits using absolute values or percentage limits
Parallel or Series equivalent circuit
Automatic blown fuse indication
Built-in test fixture or use external test leads

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
SKF Energy monitoring kit - CMAK 450-ML

The SKF Energy monitoring kit makes it possible for any facility to lower their energy cost and reduce CO2 emissions by monitoring and optimizing the energy used by their compressed air systems.

Features:

Cost savings - Can facilitate significant energy and cost reductions without major capital expense
Dualistic approach - Measure energy data and condition monitoring data at the same time
Basic kit - Measurements are easy to set up and perform

Included in the kit:

SKF Machine Condition Advisor CMAS 100-SL
The SKF Machine Condition Advisor simultaneously measures machine vibration signals and temperature to indicate machine health and bearing condition.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Features:

Non-contact InfraRed Temperature measurements with laser pointer
AC Current Only
Average responding
Peak hold captures inrush currents and Transients
MultiMeter functions include AC/DC Voltage, Resistance, Capacitance, Frequency, Diode, and Continuity
1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
4000 count backlit dual display
Features include Data Hold and Min/Max
Autoranging with manual range button
Auto Power off
Complete with test leads, 9V battery, and belt holster

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features

Ground resistance measurements down to 0.025ohms with 0.002ohms maximum resolution
True RMS AC Leakage current range of 0.2mA to 30A with 1.000mA maximum resolution
Programmable Datalogging with 116 data points
Programmable Hi/Lo Alarm
0.9" Jaw Size for Large Ground Rods
Simplifies ground resistance measurements on multiple point ground systems
Verification resistors confirm accuracy of meter
Automatic Self Calibration when powered on
9999 Count High Contrast LCD Display
Electrical Noise Detection feature prevents inaccurate readings
Data Hold and Continuity Beeper
Complete with 9V battery, Resistance check plate and carrying case

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features

1000A Clamp measures 1f or 3f (phase) power to 600KkW
Display True Powe, Apparent Power, Power Factor, True RMS Voltage and Current, Resistance and Frequency
Dual display of kW+PF, kVA+FP, V+A, A+Hz or V+Hz
Clamp jaws open to 1.8" (46mm)
Built-in recorder datalogs up to 4000 readings or download to a PC
25 point data memory viewable on the LCD display
Full function display on large 4-digit LCD with fast 40 segmant bar graph, Peak Hold and MIN/MAX
RS-232 module with PC software to capture and display data
Complete with RS-232 module, Windows 95/98/NT/2000/ME/XP compatible software, cable, 9V battery, alligator clips, test leads, and carrying case

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
30A True RMS AC/DC Mini Clamp

Highest Resolution And Accuracy At Low Currents
Low AC/DC Current measurements with high resolution to 0.1mA AC and 1mA DC
Voltage measurements using test leads
Fast 40 segment bargraph
One touch Auto Zero for DC Current measurements
Min/Max
Data hold and Auto power off

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


200A AC/DC Mini Clamp Meter

High Resolution Mini Clamp With Voltage, Frequency, And Resistance
High resolution to 10mA AC/DC
Voltage, Resistance, and Frequency
Fast 40 segment bargraph
One touch Auto Zero for DC Current measurements
Min/Max
Data hold and Auto power off