LM OG-I-SS
Leakproof, magnetic drive Large LCD Display One decimal point precision Push button calibration Totalization in gallons or liters Delivery in pints, quarts, liters or gallons Only two parts to reduce maintenance costs Accuracy to ±0.3% Minimum three year battery life Low battery indicator Replaceable battery Battery shelf life – 10 years Humidity and moisure resistant register Two year limited warranty Not for use in Ex-zone
The electronic register module contains a microprocessor board powered by a lithium battery with an expected life of 3 to 5 years depending on use. It can be programmed to dispense in pints, quarts, liters, or gallons and will totalize in liters or gallons. A calibration factor and unit of measure are programmed during factory test. Unlike mechanical meters, these units can be electronically recalibrated in the field when necessary. A 5-digit liquid crystal display, accurate to the second decimal place, shows the exact amount of fluid dispensed. The entire register module is protected from the wear and tear of normal shop use by a rugged, glass filled, shock resistant, nylon housing.
LM OG-TI-SS
Does not require external power Rugged, corrosion resistant stainless steel enclosure Watertight, NEMA 4X housing Compatible with most flow controllers and counters with scaling capabilities Humidity and moisture resistant transmitter Maximum operating pressure 100 bar For use in Ex-zone 1 (with suitable drive)
The stainless steel meter with pulse transmitter, model LM OG-TI, is an economical, rugged yet accurate meter. The transmitter, mounted on the meter, can be wired to batch controllers, remote counters and other electronically operated instruments that can accept pulses from a reed switch, and have scaling capabilities. The oval gear transmitter is contained in a glass filled plastic housing with a NEMA 4X rating.