Gá ghép nối

HotLine (04)-2242 8148

Thiết bị đo điện đa năng

Tìm kiếm
Sản phẩm được quan tâm

Trang chủ > Kiểm Tra Và Bảo Trì > Gia Tốc Rung > Gá ghép nối

Sắp xếp theo

- CMCP270 Piloted Spot Reamer
- Mã SP: CMCP270
- Lượt xem: 3996
- Tình trạng:
- The CMCP-270 is used to mill a 1" (2.54 cm) smooth flat area on bearing housings. The flat area will accept a stud or epoxy adhesive mounted accelerometer with a CMCP-200 mounting pad.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- CMCP211 Loctite Depend 330 with Spray Activator
- Mã SP: CMCP211
- Lượt xem: 3901
- Tình trạng:
- 25-50 applications (1" Pad)
  -60F to 250F (-51C to 121C)
  1 Minute setup time
  
  Simple, easy to use solution for gluing CMCP200 Accelerometer Mounting Pads to a machine surface. Each kit will mount 25-50 pads.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- CMCP206 Adhesive Filler (50 ml)
- Mã SP: CMCP206
- Lượt xem: 3955
- Tình trạng:
- Requires minimal surface preparation. Bonds dissimilar substrates as well as unprepared metals, ceramics, wood, and standard engineered plastics. Functional cure in 1 hour. Final bond resistant to weathering, humidity, and wide variations of temperature. 1:1 formula for easy dispensing. Creamy consistency with good gap filling capabilities. Tough fast curing structural adhesive with superior impact and peel resistance to most plastic surfaces such as ABS PVC, SMC, composites polyesters, polycarbonate, strenics, PET, fiberglass wood, concrete, ceramic and metal. CMCP206 Adhesive Filler is used to permanently mount CMCP205 Motor Fin Mounts. It is used to anchor the Fin Mount between the Cooling Fins of the Motor. Simply bottom out the proper Fin Mount and inject Adhesive Filler to fill gaps to firmly anchor. The cartridge is designed for use with the CMCP207 Dispenser and CMCP208 Mixing Nozzles.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- CMCP210 Acrylic Adhesive Bypacs
- Mã SP: CMCP210
- Lượt xem: 3826
- Tình trạng:
- Why drill a hole when you don't have to? Make use of existing plugged holes on your machine. The CMCP-203 Pipe Thread Mounting Adapter is made of 316 Stainless Steel and surfaced for accelerometer mounting. The CMCP-203 Pipe The CMCP-210 is an easy to use solution for gluing accelerometer mounting pads to a prepared surface area. The adhesive is prepared inside the bypac by removing a plastic separator and kneading together the two adhesive components. A corner of the bag is then removed to allow easy dispensing of the mixture. Each bypac will glue one to two accelerometer mounting pads.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- CMCP211 Loctite Depend 330 with Spray Activator
- Mã SP: CMCP211 LOCTITE DEPEND 330
- Lượt xem: 3792
- Tình trạng:
- 25-50 applications (1" Pad)
  -60F to 250F (-51C to 121C)
  1 Minute setup time
  
  Simple, easy to use solution for gluing CMCP200 Accelerometer Mounting Pads to a machine surface. Each kit will mount 25-50 pads.
  
  Note: This item is classified as a Hazardous Material. For all shipment methods other than UPS Ground, there will be a $60.00 HazMat Handling Fee added at the time of shipment. This fee covers the required shipping container and all necessary paperwork.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- CMCP203 Mounting Adapters
- Mã SP: CMCP203
- Lượt xem: 4099
- Tình trạng:
- Why drill a hole when you don't have to? Make use of existing plugged holes on your machine. The CMCP-203 Pipe Thread Mounting Adapter is made of 316 Stainless Steel and surfaced for accelerometer mounting. The CMCP-203 Pipe Thread Mounting Adapters provide a mounting location for permanently mounted accelerometers. They are are provided in both several NPT sizes to accommodate the most common plugs found on most machinery. The adapters have a 1/4"-28 UNF threaded hole to mate with the most common accelerometers and vibration transmitters.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- CMCP205 Accelerometer Motor Fin Mounts
- Mã SP: CMCP205
- Lượt xem: 3880
- Tình trạng:
- The CMCP205 Motor Fin Mounts provide a mounting location for either magnetically mounted or permanently mounted accelerometers on motors where the bearing housing is not accessible. The CMCP205's come in four sizes, are machined from 416 SS and are adhesive mounted between the cooling fins of the motor.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- CMCP280 API-670 Accelerometer Housing
- Mã SP: CMCP280 API-670
- Lượt xem: 3931
- Tình trạng:
- The CMCP280 case mount accelerometer housing provides physical and environmental protection for several sensors when permanently mounted. Its use is primarily designed for installations where the accelerometer is prone to damage from adverse conditions. When properly installed the CMCP280 meets API 678 standards. The mounting kit includes a dome cover, a mounting base with a single 3/4” NPT conduit connection, a neoprene base gasket, O-ring gasket for the cover, mounting bolts, washers, and one (1) 1/2” NPT reducing bushing. The kit does not include the accelerometer. The CMCP280 will accommodate any sensor that has a diameter less than 1.25” and an installed height of less than 4.75”.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- CMCP220 Accelerometer Adhesive Mounting Kits
- Mã SP: CMCP220
- Lượt xem: 3902
- Tình trạng:
- The CMCP220 Adhesive Mount Kit provides all the items necessary for adhesive mounting of accelerometers. Conveniently sized for 10, 32, 64 or 128 Accelerometers, the kits contain the required mounting pads, adhesive bypacs, silicone dielectric and piloted end mills.
  Each Kit Includes the Following Quantities:
  CMCP220- 10
  32
  64 128
  CMCP200 Mounting Pads 10 32 64 128
  CMCP210 Adhesive Bypacs 10 32 64 128
  CMCP212 Silicone Dielectric 1 2 3 6
  CMCP270 Piloted End Mill Kits 1 2 3 6
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- CMCP200 Accelerometer Mounting Pads
- Mã SP: CMCP200
- Lượt xem: 3773
- Tình trạng:
- 1/4"x28 stud or epoxy mounted our stainless steel mounting pads are used to provide a flat surface for mounting accelerometers. They are available in 416 SS magnetic versions for use with accelerometer magnetic bases and 316 SS non-magnetic versions for standard stud mounting. They are available with and without a 1/4"-28 UNF threaded mounting hole. All versions are 1" in diameter and available in either 1/4" or 3/8" thickness.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- CMCP250 Accelerometer Mounting Kit
- Mã SP: CMCP250
- Lượt xem: 3738
- Tình trạng:
- Mount your Accelerometers quickly and easily with the CMCP250 Accelerometer Mounting Kit. The kit includes all the items required to mount up to 33 Accelerometers: 25 Mounting Pads and 8 Motor Cooling Fin Mounts. Kit includes: stainless steel mounting pads, stainless steel motor fin mounts, stainless steel mounting studs, mounting epoxy with activator, plastic filler, mixing nozzles, silicone dielectric, silicone RTV, 1" dia. spot mill, pilot, drill, tap, tap handle, carrying case and instructions.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :