List thumbnail 
Sắp xếp theo
  • Máy đo biên dạng bánh răng
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • Automatic Probe Arm Changing Device TWE
    • Automatic Probe Arm Changing Device TWE
    • Mã SP: CB0MA- FBV
    • Lượt xem: 4414
    • Tình trạng:
    • Technological advancement allows an increasingly higher quality of components along with the trend towards smaller dimensions of workpieces.

      The quality of contour and surface play an increasingly important role.
      The demand for automated testing close to the production site continues.
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • MarSurf LD 120 Aspheric
    • MarSurf LD 120 Aspheric
    • Mã SP: CB0MA- GET
    • Lượt xem: 4538
    • Tình trạng:
    • An increasingly more compact and favorable system design is demanded on optical systems such as zoom lenses, optics for DVD drives and lenses in the cameras of mobile phones, for example.

      For this purpose, in addition to classic, spherical lense shapes (sphere-shaped), the optics industry is increasingly producing aspheric shaped (not sphere-shaped) lenses.
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • CNC Surface and Contour Measuring Station for Shafts
    • CNC Surface and Contour Measuring Station for Shafts
    • Mã SP: CB0MA- FGN
    • Lượt xem: 4341
    • Tình trạng:
    • There is an increasing trend towards automated surface and contour measuring.

      Positioning the probe system to the measuring point on small workpieces usually takes place by moving or turning the workpiece.

      For larger or longer and heavier components, it is more advantageous to move the measuring element to the measuring point of the workpiece and not the other way around.

      The measuring station "XP 20 V2 CNC, Model 6" described here provides the solution to your surface and contour measurement tasks on shafts.
      Especially camshafts and crankshafts can be measured up to a length of 800 mm (31.5 in) and a diameter of 300 mm (11.8 in).
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • MarSurf XP 20 MarWin
    • MarSurf XP 20 MarWin
    • Mã SP: CB0MA- 20M
    • Lượt xem: 4745
    • Tình trạng:
    • Metrology becomes more and more an integrated part in the manufacturing line. Process supervision in or at least close to the production is very important to detect and correct soonest possible deviation trends or at the worst stop manufacturing.
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • MarSurf UD 120 / LD 120 MarWin
    • MarSurf UD 120 / LD 120 MarWin
    • Mã SP: CB0MA- UDF
    • Lượt xem: 4611
    • Tình trạng:
    • Roughness and contour in a single stroke You need only half the time and your work is faster, more reliable and more efficient.With just one measurement, you have all the results for
      roughness and contour characteristics at a glance. So you have
      more time for other things!
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • MarSurf LD 130 / 260
    • MarSurf LD 130 / 260
    • Mã SP: CB0MA- 130
    • Lượt xem: 4961
    • Tình trạng:
    • High measuring and positioning speed
      Long measuring length, karge measuring stroke
      Groundbreaking oribe system with bionic probe design
      Probe arms with magnetic holder and probe arm recognition
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • MarSurf XCR 20
    • MarSurf XCR 20
    • Mã SP: CB0MA- XCR
    • Lượt xem: 5126
    • Tình trạng:
    • The new generation of combined roughness and contour measurement systems. The MarSurf XCR 20 is ideal for combining contour and roughness depth evaluation. The roughness software and contour software each have their own user interface. MarSurf XCR 20 is Mahr's top surface measurement system and enables even semi-automated operating sequences such as measuring stand positioning (ST 750 CNC) to be performed with ease.
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • MarSurf XC 20 MarWin
    • MarSurf XC 20 MarWin
    • Mã SP: CB0MA- CX2
    • Lượt xem: 4934
    • Tình trạng:
    • MarSurf XC 20 is the top contour system of Mahr. The system offers with the optimal measuring equipment the highest measuring performance. MarSurf XC 20 controlls the drive units PCV as well as the measuring stand ST 500 or ST 750.

      The MarSurf measuring stations combine outstanding instruments with patented ideas.
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • MarSurf XC 2 MarWin
    • MarSurf XC 2 MarWin
    • Mã SP: CB0MA- XC3
    • Lượt xem: 4950
    • Tình trạng:
    • Measuring and evaluating geometries of workpieces and tools that are relevant for correct functioning is one of the primary requirements of research, technology and industry. The tried-and-tested, user-friendly MarSurf XC 2 is the best example of this. Not only does it meet all requirements in terms of accuracy and different evaluation criteria, it also delivers reliable results time after time.
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • MarSurf XR 1
    • MarSurf XR 1
    • Mã SP: CB0MA- XR1
    • Lượt xem: 5103
    • Tình trạng:
    • The software for roughness measurement is characterized in the basic version by the following characteristics:

      • Over 80 parameters selectable for R, P, W profile as per current standards ISO/JIS or MOTIF (ISO 12085)
      • Band-pass filter Ls according to current standard, LS can also be switched off or freely varied
      • Comprehensive recording records
      • Quick and Easy measuring programs can be quickly created in the teach-in procedure
      • Automatic function for the standardized selection of cutoff and probe length (patented)
      • Support of different calibration methods (static and dynamic) with specificaiton of the parameter Ra or Rz
      • Maintenance and calibration intervals can set
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • MarSurf M 300 C
    • MarSurf M 300 C
    • Mã SP: CB0MA- 300C
    • Lượt xem: 4982
    • Tình trạng:
    • Measuring range up to 350 μm (0.014 in)
      Selectable unit of measure μm/μinch
      Standards: ISO/ASME/JIS and MOTIF selectable
      Tracing lengths as per DIN EN ISO 4288/ ASME B46.1: 1.75 mm, 5.6 mm, 17.5 mm
      (0.07 in, 0.22 in, 0.7 in)
      as per EN ISO 12085: 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • MarSurf M 300
    • MarSurf M 300
    • Mã SP: CB0MA- 300
    • Lượt xem: 5029
    • Tình trạng:
    • Measuring range of up to 350 μm (.014 in)
      Units μm/μinch selectable
      Standards: ISO/ASME/JIS and MOTIF selectable
      Travsersing length as per DIN EN ISO 4288/ ASME B46.1:
      1.75 mm, 5.6 mm, 17.5 mm (0.07 in, 0.22 in, 0.7 in)
      as per EN ISO 12085: 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm
      Number of sampling lengths selectable from 1 to 5
      Automatic selection of filter and traversing length conforming to standards
      Phase-correct profile filter as per DIN EN ISO 11562
      Cutoff 0,25 mm 0,80 mm 2,50 mm
      (0.010 in 0.032 in 0.100 in)
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • Pocket Surf PS1
    • Pocket Surf PS1
    • Mã SP: CB0MA- PS1
    • Lượt xem: 4894
    • Tình trạng:
    • Measuring range: 350 µm/180 µm/90 µm (changes automatically)
      Pick-up: Inductive skidded pick-up, 2 μm (80 μin) stylus tip, measuring force approx. 0.7 mN
      Unit of measurement: Metric, inch
      standards: DIN/ISO/JIS/ASME
      Traversing length Lt* 1.75 mm, 5.6 mm, 17.5 mm; automatic (0.069 in, 0.22 in, 0.69 in)
      Traversing length (acc. to MOTIF): 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm (0.040 in,
      0.080 in, 0.160 in, 0.320 in, 0.480 in, 0.640 in)
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • Pocket Surf
    • Pocket Surf
    • Mã SP: CB0MA- BG
    • Lượt xem: 5145
    • Tình trạng:
    • Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measurements on a wide variety of surfaces; can be used confidently in production, on the shop floor and in the laboratory.

      Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface finish gaging.

      Can be used to measure any one of four, switch-selectable, parameters: Ra , Rmax/Ry , Rz.

      Selectable traverse length 1, 3 or 5 cut-offs of 0.8 mm/.030 in.
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • MarSurf M 400
    • MarSurf M 400
    • Mã SP: CB0MA- M400
    • Lượt xem: 5042
    • Tình trạng:
    • Profile determination: Primary, waviness and roughness profile
      Probes: Inductive skidless tracing system with exchangeable probe inserts, 2 μm probe arms, measuring force approx. 0.7 mN (standard)
      Standards DIN/ISO/JIS/ASME/MOTIF
      Traversing lengths Lt as per DIN EN ISO / JIS:
      1.75 mm, 5.6 mm, 17.5 mm automatic, free entry
      (0.07 inc, 0.22 in, 0.7 in)
      as per MOTIF: 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm
      Evaluation lengths lm (as per ISO/JIS) 1.25 mm, 4.0 mm, 12.5 mm
      Number n of sampling lengths (as per ISO/JIS): selectable
      Automatic selection of filter and tracing length according to standards
      Gaussian filter (as per DIN/JIS), Ls filter Standards DIN/ISO/JIS/ASME/MOTIF
      Cutoff lc (as per ISO/JIS): 0.25 mm, 0.8 mm, 2.5 mm, automatic,
      (0.010 in, 0.032 in, 0.100 in)
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • Primar Family Program Shaving Cutter
    • Primar Family Program Shaving Cutter
    • Mã SP: CB0MA- TOP
    • Lượt xem: 4320
    • Tình trạng:
    • A new measuring program is defined in templates. The operator only enters the geometry of the workpiece and selects the desired features. The part is then automatically measured. Family programs are particularly fast and flexible in the case of part families or changes. The measuring accuracy rises, as no measuring programs have to be programmed. The results can thus be compared more quickly and accurately, as the tasks are always performed with the same optimized measurement strategy for solving the problem. Time-intensive and error-intensive learning programs for the operator are eliminated.
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • Primar Family Program Hob
    • Primar Family Program Hob
    • Mã SP: CB0MA- TIO
    • Lượt xem: 4676
    • Tình trạng:
    • A new measuring program is defined in templates. The operator only enters the geometry of the workpiece and selects the desired features. The part is then automatically measured. Family programs are particularly fast and flexible in the case of part families or changes. The measuring accuracy rises, as no measuring programs have to be programmed. The results can thus be compared more quickly and accurately, as the tasks are always performed with the same optimized measurement strategy for solving the problem. Time-intensive and error-intensive learning programs for the operator are eliminated.
    • Giá NY: Liên hệ
    • Giá bán: Liên hệ
    • Khuyến mãi :
  • Trang:
    123
Có sản phẩm
Có: 0 sản phẩm trong giỏ
  • Hỗ trợ trực tuyến
  • Ms. Yến
    Tell/ Zalo: 0948.007.822
Yêu cầu gửi báo giá
  • Nhận tin khuyến mãi qua email
  • Quý khách vui lòng nhập địa chỉ email vào ô dưới đây để nhận được các bản tin khuyến mại sớm nhất từ tshops
Máy So Màu - Bơm Màng Aro - Máy Đo Độ Cứng - Liều kế cá nhân - Cốc Đo Độ Nhớt - Kính Hiển Vi - Bộ căn mẫu - Duong ren - Máy đo độ ồn - Máy đo 3D - Máy đo cường độ ánh sáng - Động cơ phòng nổ
Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-