Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Features

Large backlighting LCD displays 10 parameters simultaneously (kW, kVAR, kVA, PF plus the voltage and current of the three phases)
Clamp-on True RMS power measurements with software for Harmonics analysis
Displays Active Power (kW), Apparent Power (kVA), Reactive Power (kVAR) and Power Factor
Current measurements to 1000A and Voltage measurements to 600V
kWH, kVARh and kVAh energy measurements
Automatically logs up to 20,000 sets of measurements and manually logs up to 99 set
Programmable Start/Stop datalogging times
PC interface with Windows 95/98/NT/2000/ME/XP compatible software for single and three phase voltage/current Waveform display and Harmonic analysis
Phase sequence measurements
Complete with 4 current clamps, 4 voltage leads with alligator clips, 8 AA batteries, software, PC interface cable, and carrying case

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features

400 count dual display LCD
Clamp jaws open to 2.2" (55mm) for 1000MCM conductors
3 phase measurements on both 3 or 4 wire balanced and unbalanced loads
Measure True Power (AC, DC)
Measures Reactive (KVAR), and Apparent (KVA) Power to 1200KW
Display Lead/Lag Current/Voltage phase shift in degrees
Store and recall last five measurements
Basic Measurements: Watts, Volts, Amps, and Frequency
Advanced: KVA, KAR, power factor, and phase angle
Wide ranges to 1200kW, 600V, and 2000A
Dual displays: kW & PF, KVA & KVAR, phase-angle & Hz, Volts & Hz, Amps & Hz
Data Hold
Built-in DCA Auto-Zero
Advanced Relative and Min/Max functions
Complete with test leads, carrying case and 9V battery

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features

Four simultaneous LCD displays of Watts, Power Factor or VA, Voltage or Hz, Amps
True RMS Voltage and current measurements of sine, square, triangular and distorted wave forms with a crest factor<5
Plug device to be tested directly into the Power Analyzer
Built-in Datalogger that stores up to 1,012 readings. Choice of single record storage or continuous datalogging
Choice of battery or AC adaptor power
Max Recall, Data Hold, Overload Protection
Sampling (update) rate is 2.5 times per second
Windows 95/98/NT/2000/XP/ME software allows user to download stored data or save data directly, and to create an ASCII file. Computations include phase angle, apparent and reactive power, consumption and cost, and power factor correction
Includes software, serial cable, 8AA batteries, power cord, 117 VAC adaptor, and built in carrying case

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Appliance Tester/Power Analyzer

Compact, Battery Operated Device For Analyzing AC Power Loads - With PC Interface Plus Datalogging
Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
Plug device to be tested directly into the Power Analyzer
Max, Data Hold and Overload Protection
Battery or AC adaptor provides line isolation
Sampling (update) rate is 2.5 times/second

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features:

One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
Built-in 6,000 count True RMS MultiMeter with analog bargraph
Easy-to-use pop-up menu with built-in multi-language system
23 Automatic Measurements
Waveform Math: Add, Subtract, Multiply, and Divide
Store and recall up to 1000 waveform screens and setups using the installed 2G microSD card
Automatic cursor tracking measurements
Pass-Fail function compares a stored waveform to an unknown input
Average Mode for smoothing waveforms

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features:

One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
Built-in 6,000 count True RMS MultiMeter with analog bargraph
Easy-to-use pop-up menu with built-in multi-language system
23 Automatic Measurements
Waveform Math: Add, Subtract, Multiply, and Divide
Store and recall up to 1000 waveform screens and setups using the installed 2G microSD card
Automatic cursor tracking measurements
Pass-Fail function compares a stored waveform to an unknown input
Average Mode for smoothing waveforms
Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


MS420: 20MHz 2-Channel Digital Oscilloscope
Dual-channel Oscilloscope with 3.8" (97mm) color LCD display

Features:

Auto-set function optimizes the position, range, timebase, and triggering to assure a stable display of waveforms
Peak Detect function for 50ns glitch capture
XY Mode and FFT function to view component frequencies
Twenty Automatic Measurements including Frequency, Cycle, Average, Peak to Peak, RMS and more
Waveform Math: Add, Subtract, Multiply, and Divide
Average Mode for smoothing waveforms
Persistence Mode for observing dynamic signals
Store and recall up to 4 waveform screens and setups
USB interface and software for transferring waveforms and data

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features:

One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
Built-in 6,000 count True RMS MultiMeter with analog bargraph
Easy-to-use pop-up menu with built-in multi-language system
23 Automatic Measurements
Waveform Math: Add, Subtract, Multiply, and Divide
Store and recall up to 1000 waveform screens and setups using the installed 2G microSD card
Automatic cursor tracking measurements
Pass-Fail function compares a stored waveform to an unknown input
Average Mode for smoothing waveforms

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Technicians appreciate the bright backlight of the 3" x 3" cold cathode fluorescent display and rugged construction inside and out.

Includes the following:

Two Test Leads
Two Banana to BNC Adapters
One DC-60 MHz x 1 x 10 Passive Oscilloscope Probe
Power Supply and Instruction Manual


New with the 460:

Cursor Readout
Decibels
Pre and Post Triggering
cULus 3111

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
6 Instruments in 1

Auto Ranging 4,000 Count True RMS DMM
TPI's 440 has 9 measurement functions and 0.3 basic DC accuracy.
1 MHz Oscilloscope
View industrial power signals such as motor controls, UPS, switching power supplies, and PLC controls with detail and clarity.
Trend Mode
Graph readings over a predetermined time period to check for surges or dropouts.
Component Test
Check voltage-current signatures on capacitors, resistors, semiconductors and much more.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Compact autoranging DMM with 0.3% DCV basic accuracy and 400mA AC/DC range

4,000 count display
0.3% DCV basic accuracy
0 to 600 volts AC/DC; max resolution 0.1V
0 to 40MΩ resistance; max resolution 0.1Ω
Audible continuity
0 to 400 mA amps AC/DC; max resolution 0.01mA
Autoranging
Min/Max
Data Hold
Sleep mode/auto off
cULus 61010-1
CAT II - 1000V, CAT III - 600V
3 Year Limited Warranty

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features:

True RMS AC measurements
Relative function
Type K thermometer, Capacitance, Frequency, and Duty Cycle
Low current capability - measure down to 0.1uA
Audible and visual input alerts
Easy to read 1 inch digits on backlit display
Max Hold for AC/DC Voltage and Current measurements and Relative function for establishing a base line for reference
Complete with CAT III test leads, multi-position tilt stand and velcro strip for hanging, protective holster with test lead holder, bead wire temperature probe (-58 to 482 Deg. F/-50 to 250 Deg. C) and 9V battery

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Features:

Full range multimeter functions with 0.03% basic DCV accuracy and up to 20kHz True RMS ACV bandwidth
50,000 count (500,000 for DCV and Hz) backlit LCD display with bargraph
Special True RMS combination AC+DC function for measurements of rectified AC (non-symmetrical) voltage & current waveforms
Filtered frequency function with adjustable trigger levels for variable speed motor drives and high voltage applications
AC/DC current to 10A with 0.01µA resolution
4 to 20mA, displayed as 0-100% for process current measurements
Capacitance, Frequency, Resistance, Continuity, Duty cycle and Diode tests with 600V input protection on all functions (1000V on Voltage)
High resolution to 1µV, 0.0001Hz, 0.01Ohm, 0.01µA and 0.1°

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Features:

Built-in non-contact IR thermometer with laser
8:1 distance to target ratio
0.95 fixed emissivity
Low current capability - measure down to 0.1uA
Audible and visual input alerts
Easy to read 1 inch digits on backlit display
Max Hold for AC/DC Voltage and Current measurements and Relative function for establishing a base line for reference
Complete with CAT III test leads, multi-position tilt stand and velcro strip for hanging, protective holster with test lead holder, bead wire temperature probe (-58 to 482 Deg. F/-50 to 250 Deg. C) and 9V battery

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features:
Heavy Duty Industrial MultiMeters
Waterproof (IP67) rugged design for heavy duty use
With CAT IV-600V safety rating for industrial applications

Features:

1000V input protection on all functions
Dual sensitivity frequency functions
Large backlit LCD
Diode open circuit voltage of 2.8V DC
Auto power off with disable feature
Complete with double molded test leads, magnetic hanging strap, Type K bead wire temperature probe (EX505, EX520 and EX530), carrying case, and one 9V battery

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Features:

Built-in non-contact IR thermometer with laser
8:1 distance to target ratio
0.95 fixed emissivity
True RMS AC measurements
Relative function
Type K thermometer, Capacitance, Frequency, and Duty Cycle
Low current capability - measure down to 0.1uA
Audible and visual input alerts
Easy to read 1 inch digits on backlit display
Max Hold for AC/DC Voltage and Current measurements and Relative function for establishing a base line for reference
Complete with CAT III test leads, multi-position tilt stand and velcro strip for hanging, protective holster with test lead holder, bead wire temperature probe (-58 to 482 Deg. F/-50 to 250 Deg. C) and 9V battery

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
MultiMeter/Datalogger (up to 9,999 readings) with Wireless PC interface (433MHz)

Features:
True RMS measurements for accurate AC Voltage and Current measurements
AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
Data Acquisition Mode for real time data transmission directly to your PC
1000V input protection on all functions
Dual sensitivity frequency functions
Large triple LCD display
Complete with double molded test leads, magnetic hanging strap, Type K probe, remote receiver with USB cable, PC software, carrying case, and 9V battery

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
MultiMeter/Datalogger (up to 9,999 readings) with Wireless PC interface (915MHz)

Features:
True RMS measurements for accurate AC Voltage and Current measurements
AC/DC Voltage & Current, Resistance, Capacitance, Frequency (electrical/electronic), Temperature, Duty Cycle, Diode/Continuity
Double molded for waterproof (IP67) protection, CAT IV-600V safety rating for industrial applications
Data Acquisition Mode for real time data transmission directly to your PC
1000V input protection on all functions
Dual sensitivity frequency functions
Large triple LCD display
Complete with double molded test leads, magnetic hanging strap, Type K probe, remote receiver with USB cable, PC software, carrying case, and 9V battery