SKF TMHN 7 series - Bearing lock nut spanner

Có: 0 sản phẩm trong giỏ

SKF TMHN 7 series - Bearing lock nut spanner
  • Mã SP: SKF TMHN 7
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 4078
  • The TMHN 7 set of lock nut spanners is designed to make the mounting of self-aligning ball bearings more professional. To help ensure long-term reliability when mounting self-aligning ball bearings, it is vital to install the bearing with correct radial clearance.

    7 different-sized spanners to fit nut sizes 5 to 11
    Each spanner is clearly marked with correct tightening angle and protractor
    4 grip points on each spanner giving better and safer grip on the nut
    Reduced risk of damaging bearing by over-tightening
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền

Selection chart

  • Spanner: HNM 5
    • Correspondes to bearing designation:
      • 1205 EK
      • 2205 EK
      • 1305 EK
  • Spanner: HNM 6
    • Corresponds to bearing designation:
      • 1206 EK
      • 2206 EK
      • 1306 EK
      • 2306 K
  • Spanner: HNM 7
    • Corresponds to bearing designation:
      • 1207 EK
      • 2207 EK
      • 1307 EK
      • 2307 EK
  • Spanner: HNM 8
    • Correspondes to bearing designation:
      • 1208 EK
      • 2208 EK
      • 1308 EK
      • 2308 EK
  • Spanner: HNM 9
    • Corresponds to bearing designation:
      • 1209 EK
      • 2209 EK
      • 1309 EK
      • 2309 EK
  • Spanner: HNM 10
    • Correspondes to bearing designation:
      • 1210 EK
      • 2210 EK
      • 1310 EK
      • 2310 K
  • Spanner: HNM 11
    • Correspondes to bearing designation:
      • 1211 EK
      • 2211 EK
      • 1311 EK
      • 2311 K

Technical data

  • Dimensions of case (wxdxh): 345 x 255 x 85 mm (13.6 x 10.0 x 3.3 in)
  • Weight: 2.2 kg (4.7 lb)

Using HNM 11 spanner to adjust a self aligning ball bearing

Tighten the nut using hand-pressure only, to make metal-to-metal contact between the tapered surfaces. Do not use the handle. Mark the shaft at a point corresponding to the beginning of the orange semicircular marking on the tool. Tighten the nut using the handle until the shaft marking corresponds to the end of the orange semicircular marking. Lock the nut.


NOTE: Make sure that the adapter sleeve does not move on the shaft while tightening.

Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-