Trang chủ > Đo lường - Thử nghiệm > Thiết Bị Đo Lực

Cờ Lê Lực Tohnichi CTA2

Có: 0 sản phẩm trong giỏ

Mã SP: CLLTNC-CTA2
Giá NY: Liên hệ
Giá bán: Liên hệ
Tình trạng:
Khuyến mãi:
Lượt xem: 8989
Cờ Lê Lực Tohnichi CTA2
- For angle-controlled bolt tightening or as back up for angle tightening nut runners.
- Dual display of angle and torque values.
999 data memory storage for snug torque, 1st/ 2nd/3rd angles, final torque and
tightening start time.
- 20 hours of continuous operation with rechargeable nickel metal-hydride battery.
- Variety of communication setup options including: USB output, baud rate setting, and handshake.
- Quick and easy snug/angle set up through keypad with additional data management through application software (included)
Tags: Bàn Map

Đơn vị tiền tệ

Số lượng:
Thành tiền

Cờ Lê Lực Tohnichi CTA2

Select proper model according to unit of measure as following color code :

S.I. =

Metric =

American =

Accuracy ±1% + 1digit

Model	Torque Range		Model	Torque Range		Model	Torque Range		Max Hand Force	Effective Lgth.	Overall Lgth.	Wgt	Ratchet Head (Included)
	Min.-Max.	Grad.		Min.-Max.	Grad.		Min.-Max.	Grad.	N	mm	mm	kg
S.I.	N.m.		Metric	kgf.cm.		American	lbf.in.
CTA50N2 X 12D	(2.5) 10-50	0.05	CTA50N2X12D-M	(25) 100-500	0.5	CTA50N2X12D-I	(25) 100-450	0.5	196.9	254	282	0.58	QH12D
CTA100N2 X 15D	(5) 20-100	0.1	CTA100N2X15D-M	(50) 200-1000	1	CTA100N2X15D-I	(50) 200-900	1	275.5	363	384	0.63	QH15D
CTA200N2 X 19D	(10) 40-200	0.2	CTA200N2X19D-M	(100) 400-2000	2	CTA200N2X19D-F	lbf.ft		428.3	467	475	0.78	QH19D
							(7.6) 30-150	0.2
CTA360N2 X 22D	(18) 72-360	0.4	CTA360N2X22D-M	(180) 720-2500	4	CTA360N2X22D-F	(13) 52-260	0.4	498.6	722	713	1.13	QH22D
CTA500N2 X 22D	(25) 100-500	0.5	CTA500N2X22D-M	kgf.m		CTA500N2X22D-F	(18) 72-360	0.5	549.5	910	949	4.0
				(2.5) 10~50	0.05
CTA850N2 X 32D	(43) 170-850	1	CTA850N2X32D-M	(4.3) 17-85	0.1	CTA850N2X22D-F	(31) 124-620	1	608	1398	1387	5.14	QH32D

1. The value shown in ( ) shows the lowest snug torque. Accuracy cannot be guaranteed for snug torque set beyond the operative torque range.
2. Overall length does not include interchangeable head.
3. PH (Pipe Head) type interchangeable head cannot be used with this model.
4.Confirm correct model when ordering: Add "-M" to order Metric models, "-I" for inch pound models, and "-F" for foot pound models

Standard Accessories

BP-5	Battery Pack
QH Head	Interchangeable Ratchet Head
BP-3-100	Quick Charger
CTA2 Disk	Application Software

Optional Accessories

Connecting Cables

575	CTA2 to PC (D-SUB 9 Pin Female
584	CTA2 to PC (USB A)

Interchangeable Heads

Carrying Case

Common Specifications

Data Memory	999 data (Tightening Torque, 1 st angle value, 2nd angle value, 3rd angle value, and final torque value)
Measurement Mode	Single spindle/Production mode
Angle Measurement	0°-999°, Grad 1°
Data Output	RS232C compliant
Zero Adjustment	Auto zero (Angle, Torque)
Power	Ni-MH rechargeable battery
Continuous Use	Approx. 20hours with fully charged (8 hours by 1 hour recharging)
Recharging Time	Approx. 3.5 hours
Temperature in Use [°c]	0 ~ 40 no condensation
Other Functions	Snug torque / tightening torque / max tightening torque / 1st, 2nd, 3rd angle / 1st, 2nd, 3rd max angle / number of bolts / auto reset / judgment. Setting thru PC, Battery indicator.

Additional Information

Torque Accuracy	±1％
Angle Accuracy	±2°＋1digit (Angular velocity within 30°/s～180°/s when bolt is turned to 90°)
Tightening Completion Signal	Buzzer and LED
Clock Functions	Yes
Auto Zero	Torque/Angle
Auto Memory Setting	0.1 to 5.0 seconds
Auto Power Off Setting	3/10/30 minutes or None
RS232C Communication Output	Yes
Baud Rate	2400 – 19600 bps
Data Length	7bit/8bit
Parity Check	Even number/Odd number/None
Flow Control	RTS/CTS
USB Connecting Functions	Yes
Infrared Radiation Communication	Yes
Continuous Operation	20 hours (8hours)
Recharging Time	Approx. 3.5 hours (1 hour)
Battery	Nickel metal-hydride (BP-5)

Display	Dual (Angle and Torque)
Memory Storage	999 for Angle/Torque/Time
Setting	Sung torque, Tightening angle
Judgment (Angle upper/lower limit setting)	Yes

	CTA2 (Production Mode)
Display	Dual (Angle and Torque)
Memory Storage	Data for 999 spindles (1st/2nd/3rd angle, Final torque, Time)
Setting	Snug, 1st/2nd/3rd angle, No. of spindle
Judgment (Angle upper/lower limit setting)	Yes