UP-UE-RAS Remote Access Sensor

Có: 0 sản phẩm trong giỏ

UP-UE-RAS Remote Access Sensor
  • Mã SP: UP-UE-RAS REMOTE ACCESS SENSOR
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 4009
  • Magnetically mounted contact probe with cable for testing consistency and for hard to reach test points. Must be used with remote access module (RAM) shown on far left and sold separately.
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền
Magnetically mounted contact probe with cable for testing consistency and for hard to reach test points. Must be used with remote access module (RAM) shown and sold separately.

Have you ever had a problem where you can’t get your contact (stethoscope) probe on a bearing because it is enclosed in a cabinet? RAS (Remote Access Sensor) is your answer.

Installation is simple!

Just mount the RAS transducer on your test subject, attach the BNC cable, run the cable through an access hole and plug it into your Ultraprobe 9000, 10,000, or 15,000.

Testing is real easy!

Now, every time you come by, just plug it into your Ultraprobe 9000, 10,000, or 15,000, record your data and move on.

UE RAS Specifications

  • Transducer: Piezoelectric, stainless steel housing with female BNC connector
  • Dimensions: Dia. 1.0″ (2.54 cm) Length: 2.4″ (6.1 cm)
  • Thread: (female) 10/32
  • Cable: BNC connector, 25 ft (7.6 m) standard. Can be ordered up to 50 ft. (15.2 m)
  • Preamp: Electronics are designed to interface with Ultraprobe 9000, 10,000, or 15,000 models only
  • Frequency Response: 20 kHz – 100kHz
  • Operating Temp.: 32° – 140°F (0° – 60° C)

To get started, you’ll need:

  • RAS Permanent Mounted Sensor with a 25′ (17.6m) cable*
  • RAM Adaptor (connects to Ultraprobe 9000, 10,000 and 15,000 only)

*Multiple RAS transducers may be connected to one Remote Access Module

Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-