Digital Temp Controller (Relay output 2 points)

Có: 0 sản phẩm trong giỏ

Digital Temp Controller (Relay output 2 points)
  • Mã SP: FX3D
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 4195
  • - Heating/Cooling Output
    - Independent Timer Output
    - High/Low Limit Alarm
    - Defrost Output
    - Sensor Calibration
    - Sensor Error Detection
    - Automatic Output Cycle after Sensor Error
    - Auto Save and Restoration of Parameter Values
    - Minimum On/Off Duration Time
    - Analog Signal Output(4-20mA)
    - Communication via RS485 MODBUS
    - Remote Control(FX3D to FX3D)
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền

Heating/Cooling Output
Depending on the purpose, users can select between heating and cooling output.


Independent Timer Output


High/Low Limit Alarm


Defrost Output


Sensor Calibration
Users can calibrate a sensor by adjusting between sensored and actual temperature.


Sensor Error Detection
It detects the sensor errors automatically and alarms immediately.


Automatic Output Cycle after Sensor Error
In terms of risk management, users can configure the automatic output cycle after sensor error.


Auto Save and Restoration of Parameter Values
Parameter values are saved into the nonvolatile memory safely and restored after blackout automatically. 
You can always use with peace of mind.


Minimum On/Off Duration Time
Regardless of conditions, it maintains on or off status during the period set by user.

Analog Signal Output(4-20mA)
FX3D transmits the analog signal(4-20mA) to other devices or equipments.


Communication via RS485 MODBUS
It is versatile. Communication via RS485 provides many options to the users
(remote control, remote display, data manipulation, and etc.)


Remote Control(FX3D to FX3D)
Based on master and slave connection, FX3D can remotely control other FX3D via network.



■ Technical Specifications

FX3D-00FX3D-A1FX3D-R4
Dimensions 78(W) X 35(H) X 78(D)mm
※ Panel Cut-Out Form 71(W) X 29(H)mm
Power 100~240Vac, 50/60Hz
Power Consumption 4VA
Connection Screw Terminal(Up to 1.5㎟ Wire)
Input/Output Temperature
Sensor Input		 1P
Analog Input
(4-20mA)		 1P(Loop Powered)
Relay Output 2P(250Vac/10A)
Sensor Temperature DOTECH Standard NTC sensor DPR-TH01
Type : NTC 5KΩ
Range : -50~105℃
Accuracy : ±0.3℃ at 25℃

DOTECH Standard NTC sensor DPR-TH02(Optional)
Type : NTC 10KΩ
Range : -50~150℃
Accuracy : ±1.5℃ at 25℃
Analog Signal Output
(4-20mA)		 - OK -
RS485 Communication
(MODBUS RTU/ASCII)		 - - OK
Operation Temperature -10~50℃  / Humidity under 90% RH
Storage Temperature -20~60℃  / Humidity under 90% RH


■ Accessories
Category Model Specifications
Temperature Sensor DPR-TH01 Type : NTC 5KΩ
Range : -50~105℃
Accuracy : ±0.3℃ at 25℃
DPR-TH02 Type : NTC 10KΩ
Range : -40~150℃
Accuracy : ±1.5℃ at 25℃

■ Diagram

■ Dimensions

Bộ Điều Khiển Máy Nén Khí Dotech
Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-