Bộ tháo vòng bi

HotLine (04)-2242 8148

Thiết bị đo điện đa năng

Tìm kiếm
Sản phẩm được quan tâm

Trang chủ > Kiểm Tra Và Bảo Trì > Tháo Lắp Vòng Bi > Bộ tháo vòng bi

Sắp xếp theo

- SKF TMMR F Series - Reversible Jaw Pullers
- Mã SP: SKF TMMR F SERIES - REVERSIBLE JAW PULLERS
- Lượt xem: 4627
- Tình trạng:
- Combined internal and external puller
  
  Both internal and external pulling
  Puller for use in every workshop
  Self-locking arms
  Special safety neck avoids damaging of thread and arms
  Extra hexagonal head on beam allows rotation during dismounting
  Gripping range from 12 to 350 mm (0.5 to 13.8 in)
  Also available as complete set on a stand
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TMMD 100 Deep Groove Ball Bearing Puller Kit
- Mã SP: SKF TMMD 100
- Lượt xem: 4788
- Tình trạng:
- The claws are especially designed to facilitate a precise fit in the bearing's raceways, providing good grip and allowing the application of higher dismounting forces
  Each puller arm is fitted with a spring for easy installation
  The puller arms are made of a single piece, laser-cut hardened-steel for strength and longevity
  Arm sizes 4, 5 and 6 are fitted with filling plates to accommodate a wide range of bearings The hexagon head of the spindle is equipped with an anti-slip pin, which prevents the spanner from sliding down the spindle during dismounting
  The rotation angle of the claw has been limited to allow easy insertion
  The designation is laser-engraved on the arms allowing easy identification and selection
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TMBS E Series - Strong Back Pullers
- Mã SP: SKF TMBS E SERIES - STRONG BACK PULLERS
- Lượt xem: 5317
- Tình trạng:
- Easy bearing dismounting even in the tightest spaces
  
  Dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or where the application demands a long reach
  Hydraulic and Mechanical versions available
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TMMP Series - Standard Bearing Pullers
- Mã SP: SKF TMMP SERIES
- Lượt xem: 4631
- Tình trạng:
- One of the easiest and most effective ways to dismount small to medium size bearings is to use a mechanical puller. Using an SKF puller helps to ensure that no damage is caused to the bearing or to the bearing seating during dismounting. SKF standard jaw pullers offer you easy and safe jaw puller operation.
  
  Range of five different jaw pullers with two or three arms
  Maximum nominal span from 65 to 300 mm (2.6 to 11.8 in)
  Cone system for automatic centering and secure positioning of arms
  Strong springs to keep arms apart for easy operation
  Hardened, high quality carbon steel
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TMHP Series - Hydraulically-Assisted Heavy Duty Bearing Pullers
- Mã SP: SKF TMHP SERIES - HYDRAULICALLY
- Lượt xem: 4344
- Tình trạng:
- The SKF hydraulically-assisted pullers TMHP 15, TMHP 30 and TMHP 50 provide new combined forces of puller power and safety. They are self-centering pullers for the occasions when large forces are inevitable.
  
  Hydraulically assisted bearing pullers with a maximum withdrawal force of 15, 30 or 50 tons (33,700 to 112,000 lbf)
  Pantograph system for ultimate alignment of withdrawal forces and minimised risk of damaging shaft or bearing
  Extreme forces applied with ease (self-centering, lifting handle, eye bolt, etc.)
  Can be supplied with or without the SKF hydraulic pump TMJL 100
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF-TMHC 110E Hydraulic Bearing Puller Kit
- Mã SP: SKF-TMHC 110E
- Lượt xem: 4947
- Tình trạng:
- Powerful combination of a jaw and strong back bearing puller
  The SKF TMHC 110E is a hydraulic puller kit, which combines a jaw puller and a strong back puller with up to 100 kN (11.2 ton US) pulling power. The versatile puller kit facilitates safe and easy dismounting in a variety of applications.
  
  Features
  
  Unique combination of a hydraulic jaw and a strong back puller for use in various applications
  High load rating of 100 kN (11.2 ton US) make the TMHC 110E suitable for use in many applications
  Hydraulic spindle facilitates easy and quick dismounting, effortless generation of force
  The jaw puller includes 2 different arm sizes for maximum reach of 120 mm (4.7 in) The jaw puller can be assembled as a three-armed or two-armed puller depending on the space and demands of the application
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TMHP 10E Hydraulic Bearing Puller Kit
- Mã SP: SKF TMHP 10E
- Lượt xem: 4382
- Tình trạng:
- Effortless bearing dismounting up to 100 kN
  The SKF TMHP 10E jaw puller kit is equipped with a hydraulic spindle, which facilitates effortless bearing dismounting up to 100 kN (11.2 ton US). The versatile puller kit includes three different arm sizes and can be assembled as a two-arm puller or a three-arm puller depending on the space and demand of the application.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TMMA Pullers Series: Mechanical EasyPull Bearing Puller
- Mã SP: SKF TMMA PULLERS SERIES
- Lượt xem: 4444
- Tình trạng:
- Safe and simple bearing dismounting
  
  Equipped with spring-operated arms and a solid design, SKF's patented EasyPull is one of the most user-friendly and safe tools on the market. Ergonomically designed, the spring-operated arms enable the user to position the puller behind the component with just one movement. The mechanical TMMA series consists of 3 (TMMA 60, TMMA 80 and TMMA 100) pullers differing in size and withdrawal force.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :