INSTRUMENTS, INC.
SPECIFICATION
PHYSICAL
WEIGHT
SIZE, L x W x H
SPECIFICATIONS
MODELS 3166B and 3166B1 LIVM ACCELEROMETER
VALUE
228
2.90 x 1.00 x 1.21
UNITS
GRAMS
IN
MOUNTING PROVISION, (MOD 6523 SCREW PROVIDED)
ELECTRICAL CONNECTOR, RADIAL
MATERIAL CASE/CONNECTOR
ELEMENT STYLE
PERFORMANCE
SENSITIVITY, +/- 5% 3166B/3166B1 [1]
RANGE FOR +/- 5 VOLTS OUT, 3166B (3166B1) FREQUENCY RESPONSE, ± 5%, 3166B (3166B1)
± 3 db, 3166B (3166B1)
MOUNTED RESONANT FREQUENCY, TYP.
EQUIV. ELECTRICAL NOISE FLOOR, (RESOLUTION) 3166B (3166B1)
AMPLITUDE NON-LINEARITY (ZERO BASED BEST FIT ST.LINE METHOD) TRANSVERSE SENSITIVITY, MAX.
THRU HOLE, CAPTIVE 1/4-28 SCREW 2-PIN MILITARY 10SL-4P, HERMETIC
316L
CERAMIC PLANAR SHEAR
100/500
+/-50/+/- 10
.5 - 5,000 (.5 -1000)
.2 -12,000 (.2 -3,000)
21 (16)
.00006 (.00002)
2.0
5
ST. STEEL
mV/G
G
Hz Hz
kHz
G RMS
% F.S., MAX.
PERCENT
STRAIN SENSITIVITY
ENVIRONMENTAL
MAXIMUM VIBRATION
MAXIMUM SHOCK
TEMPERATURE RANGE
.0001
350
3000
-60 TO +250
G's PER MICROSTRAIN @ 250/µs
G's, RMS G's, PEAK
oF
ENVIRONMENTAL SEAL
ELECTRICAL
COMPLIANCE (SUPPLY) VOLTAGE RANGE [2]
EXCITATION CURRENT RANGEOUTPUT IMPEDANCE, NOM.
OUTPUT BIAS VOLTAGE,
DISCHARGE TIME CONSTANT, MIN. 3166B (3166B1)
OUTPUT SIGNAL POLARITY FOR ACCELERATION TOWARD TOP
POWER/SIGNAL GROUND to CASE ISOLATION, MIN
SUPPLIED ACCESSORIES:
(1) Model 6523, 1/4-28 MOUNTING SCREW
GLASS TO METAL/WELDED,HERMETIC
+20 to +30
2 to 20
200
10.0 to 12.0
1.0 (1.0)
POSITIVE GOING
10
VDC
mA
OHMS
VDC SEC.
MEGOHMS
[1] MEASURED AT 100 Hz, 1 G RMS. A CALIBRATION CERTIFICATE TRACEABLE TO NIST IS SUPPLIED WITH EACH INSTRUMENT.
[2] THE USE OF DYTRAN LIVM CURRENT SOURCE POWER UNITS IS RECOMMENDED. DO NOT CONNECT THIS INSTRUMENT TO
A SOURCE OF DC VOLTAGE WITHOUT CURRENT LIMITING PROTECTION, 20 mA MAX. TO DO SO WILL DESTROY THE INTERNAL AMPLIFIER AND VOID THE WARRANTY.