Trang chủ > Đo lường - Thử nghiệm > Kích thước > Đo độ dày

Corrosion Series UMX-2

Có: 0 sản phẩm trong giỏ

Mã SP: CH0-UMX2
Giá NY: Liên hệ
Giá bán: Liên hệ
Tình trạng:
Khuyến mãi:
Lượt xem: 10711
UMX-2 underwater material and coating thickness gauge, designed for offshore inspections, and rated to a depth of 1000 feet (300 meters). The UMX-2 is very versatile, offering both Dual & Single element transducers. Equipped with multiple measurement mode options, the UMX-2 will meet all your application requirements. Onboard 5,000 point data logger, all UMX-2 settings stored for each measurement, along with an actual A-Scan waveform.
Tags: Bàn Map

Đơn vị tiền tệ

PHYSICAL

Weight: 1.5 lbs (0.680kg) – with 3 AA batteries.
Size: Length (9.0 in/229 mm)
Diameter (2.375 in/60.33 mm)
Operating Temperature: -20° to 140°F (-29° to 60°C).
Keyboard: Single button, magnetically coupled switch.
Underwater Case: High strength transparent plastic housing. Depth rating of 1000 feet (300 meters).
Data Output: Bi-directional RS232 serial port, with USB converter. Windows® PC interface software.
Display:
1/2in (12.7mm) 4.5 digit LCD display.
3/8in (9.5mm) 6 alpha LCD display.
Both displays backlit (on/off/auto).

ULTRASONIC SPECIFICATIONS

Measurement Modes:
Dual Element Probes Pulse-Echo (P-E): Coating Off.
Pulse-Echo Coating (PECT): Coating On
Echo-Echo (E-E): Thru-Paint.
Single Element Probes Triple-Echo (TCG): Thru-Paint.
Pulser: Dual square wave pulsers.
Receiver: Dual receivers – manual or AGC gain control with 110dB range (limited).
Timing: 25 MHz TCXO with single shot 100 MHz 8 bit ultra low power digitizer.

POWER SOURCE

Three 1.5V alkaline or 1.2V NiCad AA cells.
Continuous operation
Backlight Off: Typically operates for 50 hours on alkaline and 15 hours on NiCad
Backlight On: Typically operates for 15 hours on alkaline and 8 hours on Nicad.
(charger not included.)
Auto power off if idle 5 min.
Battery status displayed on power up.

MEASURING

Range:Pulse-Echo Mode (P-E): (Pit&Flaw Detection) measures from 0.025 19.999 inches (0.63 to 500 millimeters).
Pulse-Echo Coating Mode (PECT): (Material, Coating, Pit & Flaw Detection): Material: 0.025 to 19.999 inches (0.63 to 500 millimeters). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters).
Echo-Echo Mode (E-E): Thru Paint & Coatings) measures from 0.100 to 4.0 inches (2.54 to 102 millimeters). Range will vary +/- depending on the coating.
Triple-Echo Mode (TCG): Thru Paint&Coatings) measures from 0.040 to 6.0 inches (1 to 150 millimeters) in steel. Range will vary based on coating thickness, material type, and probe.
Resolution: +/- .001 inches (0.01 mm)
Velocity Range: .0492 to .5510 in./µs 1250 to 13995 meters/sec
Units: English & Metric
Calibration: 8 fixed and 1 programmable Material Velocities (in/µs):
1. Aluminum 2024 – .251
2. Steel 4340 – .233
3. Stainless Steel 302 – .223
4. Iron – .232
5. Cast Iron – .180
6. PVC – .094
7. Polystyrene – .092
8. Polyurethane- .070
9. Custom User

DISPLAY

DATA LOGGER (INTERNAL)

File Formats:
Grid (alphanumeric)
Sequential (auto identifier)
Programming: Storage capacity of 1 file template. Size and dimension specified by the user.
Storage Capacity: 5,000 readings, settings, and waveform graphics.
Memory: 32 megabit non-volitile ram.

TRANSDUCER

Auto Probe Zero: Applies to dual element probes only.
Transducer Types: Dual Element 1 to 10 MHz frequency range. Custom auto recognition probes. (flaw & pit detection).
Single Element: 1 to 10MHz frequency range (general purpose).
LEMO underwater connectors.
Standard 4 foot cable.
Custom transducers and cable lengths available for special applications.

CERTIFICATION