CMCP805 Eddy Probe Bracket 1/4"-28

Có: 0 sản phẩm trong giỏ

CMCP805 Eddy Probe Bracket 1/4
  • Mã SP: CMCP80533
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 3966
  • Our Precut Stainless Steel Shims are manufactured from the highest quality, corrosive-resistant stainless steel. The shims are dimensionally uniform and are marked for permanent easy to read identification.
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền
Mounting Brackets are used when installing eddy probes (proximity probes) internally in the machine. They may be mounted directly to the side of radial bearings using two (2) 1/4"-28 Cap Screws. The brackets are 1/2" High x 1" Wide x 1" Deep (12.7 x 25.4 x 25.4 mm). The eddy probe mounting hole is offset 3/4" or 1/4" (19.05 or 6.35 mm) depending on the mounting direction of the block relative to the bearing. Tightening the mounting bolts applies a positive lock to the eddy probe preventing movement of the probe after mounting. These mounting blocks are available for 1/4"-28 UNF, 3/8"-24 UNF probe body threads. Since these mounting blocks are manufactured from Aluminum, they may be easily machined in the field as required during installation.
Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-