Variable Area Flowmeter-All Metal BGN

Có: 0 sản phẩm trong giỏ

Variable Area Flowmeter-All Metal BGN
  • Mã SP: BDAKB-BGN
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 7800
  • Switching range: 0,05 - 1 L/min ...10 -110 L/min water
    Connection: G ¼...G 1 ¼ female
    Material: brass, st. st.
    Max. pressure: 250 bar (brass), 350 bar (st. st.)
    Max. temperature: 100 °C
    Accuracy: ± 5% FS
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền

Switching range: 0,05 - 1 L/min ...10 -110 L/min water
Connection: G ¼...G 1 ¼ female 
Material: brass, st. st.
Max. pressure: 250 bar (brass), 350 bar (st. st.)
Max. temperature: 100 °C
Accuracy: ± 5% FS

Functions

The fluid flows from bottom to top through the meter tube of the flow meter. The float is lifted until an annular gap between the meter ring and the cone-shaped float is produced which corresponds to the flow. The forces acting on the float are in equilibrium. The forces that are mainly acting on the float comprise buoyancy according to the principle of Archimedes, the flow force of the medium and the weight force. Each po- sition of the float corresponds to a flow value measured during calibration, which is transferred to a scale. The BGN variable area flow meter consists of a meter tube with connections, a meter ring, and a conical float. By means of a magnet, the po- sition of the float is transferred to an encapsulated follow magnet, which has been fitted to a pointer axle. The position of a second annular follow magnet fitted on the pointer axle is transferred to the scale by means of the pointer.

 

Application

The KOBOLD-BGN meter is suitable for flow measurement of liquid or gaseous products in pipes. It shows the current flow rate in volume or mass per unit in time.

 

Applications

Flow measurement, dosing, monitoring, adjusting and control of liquid and gaseous products. The meters design makes it ideal for processes under difficult and rough operating condi- tions. The devices are available with additional electrical equip- ment for process monitoring and control

A large spectrum of wetted materials

Magneto-resistive signal transmission

Gas- or liquid damping (option)

Special design for high-pressure and high-temperature applications

Excellent heat tracing technology (option)

Double eddy current damping (special version)

Self draining (special version)

Backflow stop (special version)

Flow Controller (special version)

Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-