WM10 - 1" pulse meters

Có: 0 sản phẩm trong giỏ

WM10 - 1
  • Mã SP: AAKMN-WM0
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 13279
  • Compact size.
    Two independent pulse units which can be linked to allow doubling of the pulse output.
    Flexibility of installation options (e.g. can be mounted horizontally or vertically; no flow conditioning required).
    Low pressure drop allows for economical pump selection or gravity flow applications.
    Meter construction enables fast and easy on-site servicing without removal from application.
    Meter design minimises the number of wearable and replaceable parts and extends product life.
    Meter accuracy is verified by a factory calibration check after which an individual metrology report is issued.
    LC Display meets European CE directive for EMC.
    Deluxe/Standard Displays Pulse Version have IP65/NEMA9 protection.
    Intrinsically safe LC Deluxe & Standard Displays. Certificate of conformity numbers PTB Nr. Ex-93.C.4033x & KEMA O5ATEX1168X
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền
Model M10/WM10
Meter Type Pulse / Standard LC Display / Deluxe LC Display / MR100 LC Display
Meter Type Pulse / LCD
Meter Body Material Aluminium / 316 Stainless Steel / Bronze
Wetted Components:
Rotor Material
Shafts
O'ring		 PPS / 316 Stainless Steel
316 Stainless Steel
NBR (Nitrile)
Flow Rate Ranges
(Litres Per Minute/US Gallons Per Minute)
Above 5 cPs
Below 5 cPs		 6 To 120 / 1.6 To 32
10 To 100 / 2.6 To 2
Accuracy- Within (Of Reading) +/- 0.5%
Repeatability 0.03%
Maximum Viscosity (Of Standard Model) 1000 Centipoise (optional hi viscosity rotors)
Maximum Operating Pressure 5500kpa/ 800 Psi/ 55 Bar Flange Rule Where Fitted
Pulser Type Hall Effect or
Reed Switch or
Combination HE / RS
Pulses Per Litre/Us Gallon 36 /136.3 With Dual Pulse Output 72 / 272.6
Max. Operating Temperature 80°C / 176°F, High Temp Option 120°C / 248°F
Recommended Mesh Strainer Size 60 Mesh

Port Size

To order flowmeter you must replace ‘X’ with the relevant number. This number will determine the following specifications:

Port Size: Calibrated and
Display In:		 Electrical
Conduit Connection:
1 = 1” BSP (F) ports Litres 20mm (F)
2 = 1” NPT (F) ports US Gallons ½” NPT (F)
3 = 1” ANSI 150lb Flange Litres 20mm (F)
4 = 1” ANSI 150lb Flange US Gallons ½” NPT (F)
5 = 25mm DIN 16 Flange Litres 20mm (F)
 13=25mm JIS 10K Flange  Litres 20mm (F)

PPS = Polyphenylene Sulfide Resins

Special Models:

M10SSPH-X
Threaded Versions Only		 High Pressure Version
Working Pressure 13800 kPa / 2000 PSI / 138 BAR

Available Options: All as listed

Options and accessories

WM10 - 1” PULSE AND LC DISPLAY METERS
M10 - 1” PULSE AND LC DISPLAY METERS		 WM10ARX-X
M10ARX-X		 WM10ASX-X
M10ASX-X		 WM10SRX-X
M10SRX-X		 WM10SSX-X
M10SSX-X		 WM10BRX-X
M10BRX-X
FKM O-Ring Ο Ο Ο Ο Ο
FEP O-Ring Ο Ο Ο Ο Ο
EPDM O-Ring Ο Ο Ο Ο Ο
High Temp Rotors Ο • Ο • Ο
High Viscosity Rotors Ο Ο Ο Ο Ο
Hall Effect Sensor Ο Ο Ο Ο Ο
Reed Switch • • • • •
Solvent Kit - - - - -
Hastalloy C Shafts - - - - -
Protective Boot Deluxe LCD + + + + +
Protective Boot Standard Display + + + + +
Remote Mounted LC Display + + + + +
Heating Jacket + + + + +
4-20mA Module + + + + +
Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-