Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The Eclipse Spiral Flame and Dual-Fuel Flame Burners are a sealed nozzle mixing flat flame burner. Due to its unique construction, the flame follows the contour of the combustion block and surrounding furnace wall with virtually no forward velocity. This permits the burner to be placed close to the work load without producing flame impingement or hot spots in front of the burner and provides uniform heating over a large area.

Eclipse Spiral Flame and Dual-Fuel Spiral Flame burners are used not only on new furnaces, but to increase work capacity on existing installations. Since work load can be placed proportionately closer to the burners, a greater portion of the furnace chamber can be used.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The Eclipse ExtensoHeat Lance Burner offers the best solution available for continuous kiln heating furnaces for bricks, roof tiles and rough ceramic products. It is ideal for continuous kilns with roof top installations and furnace zones with operating temperatures above 1382ºF (750ºC). The burner lance extends through thick furnace walls to deliver the flame to the furnace load. ExtensoHeat is a nozzle mixing burner that can fire natural gas, propane, butane and other types of fuel gas.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The ExtensoJet is a nozzle-mix burner that is designed to fire an intense stream of hot gases through a silicon tipped extended combustor using ambient combustion air. The ExtensoJet was designed to be extended through the kiln wall to significantly increase hot gas penetration and circulation of the products of combustion.
The high velocity of the gases improves temperature uniformity, product quality and system efficiency. The gas velocity can be as high as 500/ft/s. The combustor comes in varying lengths from 20 inches to 56 inches.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The ThermJet Liquid burners are nozzle mix burners for light or heavy oil. The burners are designed to operate on low pressure atomizing air and will operate efficiently throughout a wide operating range. The burner is based on the highly regarded ThermJet burner which is the industry standard for velocity burners. Typical applications include high temperature kilns and forge and melting furnaces.

The ThermJet Liquid burners are available in three sizes with maximum capacities from 300,000 BTU/hr to 1,500,000 BTU/hr. All burner models can be controlled on-ratio with a cross-connected fuel regulator to maximize efficiency, or with fixed air to improve temperature uniformity in the furnace.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Furnnox is an ultra low NOx direct fired furnace burner. The Furnnox is capable of producing NOx emissions less than 30 ppm at 3% O2 in most high temperature applications. To achieve high efficiency, the burner is controlled on-ratio throughout the operating range and can be operated with combustion air temperatures as high as 1,100°F (600°C).

Furnnox burners set new standards for emissions and flexibility. Tests show that the Furnnox delivers lower emissions than any of its competitor's comparable burners. Furnnox is made to last, with rugged Eclipse dependability and reliability built in.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The Eclipse TJSR V5 is a direct fired, self-recuperative burner based on our industry proven ThermJet technology. This advanced burner design combines a high velocity flame with fuel saving recuperation. A space saving, integral eductor pulls the furnace exhaust through an internal ceramic recuperator. The recuperator preheats the incoming combustion air to very high levels, which improves furnace operating efficiency to reduce fuel usage by as much as 50% over typical ambient air burners.

The TJSR V5 design eliminates the need for hot air ductwork required by external recuperators, providing savings in hardware and installation. The internally insulated heat exchanger section and exhaust housing hold heat in the recuperative section, adding to the heat recovery efficiency.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
ThermJet is the industry standard for velocity burners, representing a technological leap forward in every area of design and performance that counts. ThermJet has the highest operating velocity of any burner available. Comparison tests with competitive models prove ThermJet delivers the lowest emissions. Integrated gas and air orifices simplify burner piping, set-up and adjustment. Air and gas inlets are independently adjustable in 90 degree increments to suit a variety of piping alternatives.Installation, operation, and maintenance are simplified and less costly.

Made to last - rugged Eclipse dependability and reliability are built in. Available in fourteen sizes with maxmum capacities from 150,000 to 20,000,000 Btu/hr. All models are available for use with preheated combustion air.