Ignition/Supervision Components

HotLine (04)-2242 8148

Thiết bị đo điện đa năng

Tìm kiếm
Sản phẩm được quan tâm

Trang chủ > Thiết bị công nghiệp > Đầu đốt công nghiệp > Ignition/Supervision Components

Sắp xếp theo

- Peepsights
- Mã SP: LAFEC-865
- Lượt xem: 5174
- Tình trạng:
- Eclipse peepsight assemblies can be used for various combustion needs. The single piece units are designed for installation on a burner.
  
  The 2/3 union assemblies may be installed on or adjacent to a burner or the wall of the application itself.
  
  Blast gate peepsights are designed with a sliding gate to isolate the peepsight from the furnace and are used on the appliance wall.
  
  The rectangular peepsight assemblies are designed for mounting in a duct or for use as a furnace viewing port.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Control Panels
- Mã SP: LAFEC-862
- Lượt xem: 5141
- Tình trạng:
- Standard products configured to specific combustion control requirements.
  
  Eclipse control panels provide the most practical, cost efficient electronic system to optimize combustion process performance.
  
  Eclipse offers a variety of standardized solutions for your burner control needs. The CP series provides a choice of three performance categories. Additional options within each category give the flexibility for the best solution.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Veri-Flame UV Scanners
- Mã SP: LAFEC-852
- Lượt xem: 5285
- Tình trạng:
- This sensor features high sensitivity ultraviolet (U.V.) for monitoring gas or oil flames which cycle on and off frequently. The Eclipse flame safeguard checks for a short-circuited, or "run-away" scanner at the beginning and end of each flame cycle. The scanner is UL listed, CSA certified and FM approved. It comes with a 6 foot cable lead. Safeguarded against reverse connection, the 90° U.V. Scanner operates with 6000 Series Multi-Flame and 6500 Series controllers.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Ignition Transformers
- Mã SP: LAFEC-841
- Lượt xem: 5422
- Tình trạng:
- Eclipse ignition transformers have excellent mechanical and electrical properties. They have safer, more durable insulation and have a high terperature rating due to its effective heat dissipation.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Pressure Switches
- Mã SP: LAFEC-840
- Lượt xem: 5267
- Tình trạng:
- Eclipse offers various brands and models of gas and air pressure switches. Click on the Technical Literature button below right for more information.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Heat Block Seal
- Mã SP: LAFEC-834
- Lượt xem: 5320
- Tình trạng:
- The Eclipse Heat Block Seal is designed to protect ultraviolet flame scanners by sealing them from hot combustion gases and insulating them from heat transferred through the scanner pipe.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Flame Equipment
- Mã SP: LAFEC-832
- Lượt xem: 5200
- Tình trạng:
- These documents have information on various components used in igniting and detecting burner flames including flamerods, igniters, insulators, ignition transformers, and connectors.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Trilogy T400 UV Scanners
- Mã SP: LAFEC-831
- Lượt xem: 5214
- Tình trạng:
- The UV Scanners in catalog section 831 are compatible with the Trilogy T400 series of flame safety controls from Eclipse, Inc. for the supervision of gas flames, yellow-burning or blue-burning oil flames and for ignition spark proving.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Peek-A-Flame
- Mã SP: LAFEC-828
- Lượt xem: 5338
- Tình trạng:
- The Peek-A-Flame Relay Series 7000 is a sensor module that activates a relay when a flame is detected by an ultraviolet sensor or a flame rod. The Peek-A-Flame is for flame detection only; it will not detect safe start, safety lockout, load switching or any other safety procedures.
  
  UL recognized, CSA certified, & FM approved.
  Plugs into an Industry Standard 11-pin base.
  Test point at the front permits direct reading of the flame signal level, 0-12 VDC.
  "Flame On" Light
  "Flame Fail" Light indicates Test condition and can be activated remotely. By applying 12-120 VAC or VDC to Pin #10. Contacts are also activated between Pin #5 and Pin #6. A test signal is ouput on Pin #11.
  Analog output on Pin #11 for remote monitoring by a PLC or similar device.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Trilogy T400 Flame Safeguard
- Mã SP: LAFEC-830
- Lượt xem: 5084
- Tình trạng:
- Simple, Secure and Efficient Burner Control.
  
  Exceptional features give you user-friendly burner control in the most advanced flame safeguard in the industry. The T400 Series Flame Safeguard controls the startup sequence and monitors the flame of individual gas or oil burners.
  
  This next generation flame safeguard is designed for simple and safe burner operation. The T400 Series is ready to use worldwide with approvals for CE and UL.
  
  The advanced operational features and quality design of the T400 make it the first choice in burner controls. T400 uses the best flame signal amplifiers in the business for difficult-to-sense burners. The integral display with its user friendly menu and multicolor indicator light show the status of burner operation program sequence and faults. Straightforward operation and targeted diagnostics make it easy to use.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Bi-Flame
- Mã SP: LAFEC-826
- Lượt xem: 5262
- Tình trạng:
- Now you can conveniently monitor, diagnose and troubleshoot dual-burner applications with computerized reliability and precision.
  
  Eclipse Bi-Flame Monitoring Systems are specifically engineered to control the startup sequence and monitor the flame of two individual gas, oil or combination gas/oil burners sharing a common valve train. Bi-Flame controls two flames as a single burner and is the ideal solution for controlling burners that must operate as a pair.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Remote Display
- Mã SP: LAFEC-825
- Lượt xem: 5207
- Tình trạng:
- This remote display operates with either the 6000 Series Multi-Flame or the 6500 Series Bi-Flame. It is connected to either Series motherboard by a 15-pin port cable which must be purchased separately. This display provides alphanumeric messages which indicate burner status as well as annuciate lockout condition in the Multi-Flame or Bi-Flame systems.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Multi-Flame
- Mã SP: LAFEC-820
- Lượt xem: 5286
- Tình trạng:
- The Eclipse Combustion Multi-Flame Burner Monitoring System controls the start-up sequence and monitors the flame of up to 20 individual gas, oil, or combination gas/oil burners connected to a common valve train. Its dynamic on-board testing checks for faulty relays, proof of valve closure, high and low fire switch interlocks, and shorted air switch.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Veri-Flame
- Mã SP: LAFEC-818
- Lượt xem: 5574
- Tình trạng:
- Monitor, diagnose, troubleshoot and control single burner systems with individual valve trains
  
  Eclipse Veri-Flame Monitoring Systems carry the approvals necessary for application virtually anywhere in the world.
  
  Versions are available to meet UL for Canada and the USA, FM, or CE standards.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Pilots
- Mã SP: LAFEC-810
- Lượt xem: 5386
- Tình trạng:
- There is an Eclipse gas pilot available for use with virtually any type of industrial burner. Complete pilot assemblies are available in atmospheric types for either low (4" w.c. to 3 psig) or high (3 psig and above) pressure gas. Ignition methods are either manual or electric.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :