Trang chủ > Đo lường - Thử nghiệm > Kích thước > Đo độ dày

Precision Series PVX

Có: 0 sản phẩm trong giỏ

Mã SP: CH0-PSPVX
Giá NY: Liên hệ
Giá bán: Liên hệ
Tình trạng:
Khuyến mãi:
Lượt xem: 10699
PVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs. The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material and display the minimum measurement scanned.Visual and audible alarm with hi and lo limit settings for specific application tolerances. Auto find features locates the detection point(s) and adjusts the display settings to bring the waveform into view. PVX comes complete with our Windows® PC software for transferring data to and from a PC.
Tags: Bàn Map

Đơn vị tiền tệ

PHYSICAL

Weight: 13.5 ounces (with batteries).
Size: 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm).
Operating Temperature:-14° to 140°F (-10° to 60°C).
Keyboard: Membrane switch with twelve tactile keys.
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Data Output:Bi-directional RS232 serial port. Windows® PC interface software.
Display: 1/8 in. VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm). EL backlit (on/off/auto).

ULTRASONIC SPECIFICATIONS

Measurement Modes: Pulse-Echo (Precision General purpose).
Interface-Echo (Precision – Thick materials).
Echo-Echo (Precision – Thin materials & thru-paint).
Pulser: Square wave pulser with adjustable pulse width (spike, thin, wide).
Receiver: Manual or AGC gain control with 40dB range, depending on modeselected.
Timing: 40 MHz with ultra low power8 bit digitizer.

POWER SOURCE

Three 1.5V alkaline or 1.2V NiCad AA cells.
Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
Auto power off if idle 5 min.
Battery status meter.

MEASURING

Range: Interface-Echo Mode: Steel 0.05 1.0 in (1.27mm – 25.4mm). Plastics from .005in. (127mm).
Echo-Echo Mode: Steel .006in -.500in (.15mm – 12.7mm).
Pulse-Echo Contact: Steel .040in – 10.0in (1mm – 254mm). Plastics from .010in (.254mm).
Echo-Echo Contact: Steel thru-paint .100in – 3.0in (2.54mm – 76.2mm).
Resolution: (selectable) +/- .001in (0.01 mm), or +/- .0001in – (.001mm).
Velocity Range: .0492 to .3936 in./ms 1250 to 9999 meters/sec
Single and Two point calibration option, or selection of basic material types.
Units: English & Metric

DISPLAY

DATA LOGGER (INTERNAL)

TRANSDUCER TYPES:

FEATURES

Setups: 16 factory and 48 user-defined setups.
Gates: Single gate in pulse-echo mode.Single gate with holdoff in interface-echo, echo-echo, and plastics mode. Adjustable threshold.
Multiple Measurement Modes: Selectable modes for use with a variety of applications.
Alarm Mode: Set hi and lo tolerances withaudible beeper and visual LEDs.
Fast-Scan Mode: Takes 32 readings per second and displays the minimum reading found when the transducer is removed.
Display continuously updates while scanning.

CERTIFICATION