TPI-707 Carbon Monoxide Analyzer

Có: 0 sản phẩm trong giỏ

TPI-707 Carbon Monoxide Analyzer
  • Mã SP: TPI-707
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 3779


  • See Technical Specs for details on TPI-707 upgrade kits

    The 707 tests flue gases at home or office spaces for the presence and location of carbon monoxide leaks. This instrument fits comfortably in your hand and operates with just the push of a button.

    Pump driven
    Pump flow block indicator
    1 ppm sensitivity
    Measures from 0 to 9,999 ppm
    Auto zero
    Backlit display
    Easy field calibration, low cost CO sensor


    SPECIFICATIONS

    Range (CO): 0 ~ 10,000ppm
    Accuracy: ñ5ppm or 5% of reading whichever is greater
    Resolution: 1ppm
    IR Printer Port
    Flue Probe
    Internal Pump
    Backlight
    Alarm: Audible
    Power Supply: 3 "AA" Alkaline Batteries
    Dimensions: 3.75" x 8" x 3", (95 x 303 x 76 mm)
    Weight: 1.1 lbs (500g)
    Warranty: 3-year limited warranty
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền
TPI-707C5 Kit
Includes TPI-707 and TPI-270
 
TPI-707A740 Kit
Includes TPI-707 and TPI-A740
 
TPI-707C6 Kit
Includes TPI-707, TPI-270 and TPI-A312
 
TPI-707C7 Kit
Includes TPI-707, TPI-270 and TPI-A740
 
 
TPI-270

APPLICATIONS

  • Thermocouples in furnace and gas appliances
  •  Heat anticipator current in thermostats
  •  Line voltages
  •  Control Voltages
  •  Flame safety control current
  •  Heating element resistance
  •  Compressor winding resistance
  •  Contractor and relay coil resistance
  •  Motor and compressor startup current
  •  Motor run and start capacitors
  •  Bar graph indicator of rapid fluctuations
  •  Continuity of wiring
  •  Measure frequency on control and line voltage
  •  Record minimum and maximum of measurements
  •  Measure temperature
  •  Measure true RMS of distorted or non-linear signals
  •  Measure line current
  •  Test continuity of circuit breakers and fuses
  •  Measure voltage of direct drive DC motors
  •  Measure power supply voltage
  •  Measure power supply current
  •  Non-contact Voltage Detection
 SPECIFICATIONS
  • Auto/Manual

DISPLAY SPECIFICATIONS

  • 4,000 count
  • Analog bar graph

BASIC FEATURES

  • AC volts
  • DC volts
  • AC amps
  • DC Microamps (using the test leads)
  • Resistance
  • Diode test
  • Audible continuity

ADDITIONAL FEATURES

  • Frequency
  • Capacitance
  • Temperature
  • Non-Contact voltage detection
  • Data hold
  • Relative Mode
  • Min/max/peak
  • Peak hold
  • Sleep mode/Auto off

RANGE AND RESOLUTION

  • Basic DC Accuracy: .5%
  • DC Voltage (maximum): 600V
  • Resolution (maximum): 0.1mV
  • AC Voltage (Maximum): 600V
  • Resolution (maximum): .1mV
  • DC Amps (maximum): 400µA
  • Resolution (maximum): .01µA
  • AC Amps (maximum): 400mA
  • Resolution (Maximum): .01 A
  • Resistance (maximum): 40M
  • Resolution (maximum): 0.1
  • Frequency (maximum): 400MHz
  • Resolution (maximum): .001KHz
  • Capacitance (maximum): 40,000°F
  • Resolution (maximum): .001nF
  • Temperature (maximum): 1000°F

AGENCY APPROVAL

  • CE IEC 1010: CAT III 600V
  • cULus 3111: Pending
 
 
TPI-A740 IR Printer
  • Self test at power on
  • Adjustable contrast
  • Uses common thermal paper
  • Manual paper advance
 

TPI-A312

Dual input temperature adapter, -40 to 1,800 °F range with two Standard fiberglass insulation probes (4 foot, beaded end)

Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-