The new CHECK-LINE TI-UMX2 Underwater Wall Thickness Gauge accurately measures the wall thickness of all metals, extent of corrosion and the thickness of coatings on them -- at depths of up to 1000 feet (300 Meters).
1. Aluminum 2024 2. Stainless Steel 302 3. Steel4340 4. Iron 5. Cast Iron 6. PVC 7. Polystyrene 8. Polyurethane 9. Custom 1
Pulse-Echo Mode: (P-E) Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters) Pulse-Echo Coating Mode (PECT): (Material, Coating, Pit & Flaw Detection): Material: 0.025 to 19.999 inches (0.63 to 500 millimeters). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters). Echo-Echo Mode (E-E): Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thickness of the coating. Triple-Echo Mode (TCG): Thru Paint & Coatings) measures from 0.040 to 6.0 inches (1 to 150 millimeters) in steel. Range will vary based on coating thickness, material type, and probe.
Resolution
0.001" (0.01 mm)
Velocity Range
8 fixed and 1 programmable Material Velocities 0.0492 to 0.5510 in./µs (1250 to 13995 m/sec)
PreSet Velocities
1. Aluminum 2024 - 0.2510 in/µs 2. Steel 4340 - 0.2330 in/µs 3. Stainless Steel 302 - 0.2230 in/µs 4. Iron - 0.2320 in/µs 5. Cast Iron - 0.1800 in/µs 6. PVC - 0.0940 in/µs 7. Polystyrene - 0.0920 in/µs 8. Polyurethane- 0.0700 in/µs 9. Custom User Set
Probe
STANDARD: Underwater Type, 1/2"-5MHz Dual-Element HD-Coating Probe OPTIONAL: Underwater Type, 1/2"-3.5MHz Dual-Element HD-Coating Probe MEMBRANE: 1/2"-5MHz Single-Element Contact Type Probe OTHER: Dual Element Type, 1 to 10 MHz frequency range. Custom auto recognition probes. Single Element Type: 1 to 10MHz frequency range. Inquire.
Display
4« - Digit, 0.5" Backlit LCD (2nd Display for menus, 3/8" 6 character LCD
Backlighting
Both Displays can be user set for ON/OFF/AUTO
Cable
4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
Connectors
Lemo, Underwater Type
Battery Type
Three (3) 1.5V AA alkaline batteries (or 1.2V NiCad)
Battery Life
BACKLITE OFF, typical 50 hours on alkaline (15 hours on NiCad) BACKLITE ON, typical 15 hours on alkaline (8 hours on Nicad)
Accessories Included
Velcro wrist strap, 4 oz. bottle of coupling fluid, AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable with USB converter and spare gasket & lube kit including Operating Instruction Manual - all in a foam-fitted carrying case
Datalogger
GRID or SEQUENTIAL data storage Capacity: 5000 wall & coating readings, settings and waveform graphics
Data Output
Bi-directional RS232 serial port, with USB converter. Windows? PC interface software
Operating Modes
PE: Pulse-Echo PECT: Pulse-Echo Coating EE: Echo-Echo EEE: Triple Echo TCG (requires T-9441-2809 MEMBRANE Probe)
Pulser
Dual square wave pulsers
Receiver
Dual receivers - manual or AGC gain control with 110dB range (limited)
Manual Gain
Limited to 5 gain settings (vlow, low, med, high, vhigh (42 to 50 dB)
Temp. Limits
Ambient: -20 to 140° F (-30 to 60° C)
Housing
High strength transparent plastic IP 68 Waterproof Rating Depth Rating: 1000 feet (300 meters)
Keypad
Single button, magnetically coupled switch
Size
Length (9.0 in/229 mm) Diameter (2.375 in/60.33 mm)
Weight
1.5 lbs (680g) - with 3 AA batteries
Warranty
Gauge: 3 Years Probe: 90 Days
Certification
CE Approved, Factory calibration traceable to national standards