Shutoff and Control Valves

HotLine (04)-2242 8148

Thiết bị đo điện đa năng

Tìm kiếm
Sản phẩm được quan tâm

Trang chủ > Thiết bị công nghiệp > Đầu đốt công nghiệp > Shutoff and Control Valves

Sắp xếp theo

- Eclipse Standard Valve Train Segments
- Mã SP: LADEC-791
- Lượt xem: 5131
- Tình trạng:
- The Eclipse Standard Valve Train Segments are designed to install faster, operate safer and deliver proven reliability for global applications. Eclipse Standard Valve Train Segments are offered in the NFPA series with UL, CSA and FM approved components or in the EN 746-2 series utilizing CE marked components.
  
  All Standard Valve Train Segments are available in nominal pipe sizes from 1/2” (25 mm) through 8” (200 mm). Threaded and flanged models are available depending on the pipe size specified.
  
  For complete configured gas train assemblies that include options for strainers, regulators, and gauges, refer to Eclipse Catalog 790 documents.
  
  Industry-best 5 business days to shipment on most assemblies.
  Industry-best 2 year warranty on entire valve train.
  Supported globally by Eclipse’s world-class service team.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Configured Packaged Valve Train
- Mã SP: LADEC-790
- Lượt xem: 4831
- Tình trạng:
- Eclipse valve trains are rated for 110-120V / 50-60 Hz operation and are designed to meet the requirements of NFPA 86 - 2003 or Industrial Risk Insurers (IRI) IM.4.2.0. The IRI version includes either a vent valve or a valve proving system.
  
  Standard components of all valve train sizes include safety shut-off valves, manual shut-off valves, high & low pressure switches, visual position indicators and pressure taps for valve seat leak testing and in-line strainers. Optional components consist of regulators, valve leak test systems, upstream and downstream gauges (2 - 1/2" face diameter) and pilot gas trains (1/2" or 3/8").
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Disk Type Check Valve
- Mã SP: LADEC-780
- Lượt xem: 4903
- Tình trạng:
- Eclipse Series 1000 Disc Type Check Valves are designed to prevent reverse flow of gas or air, however, they are not designed for tight shut-off. They are especially suited for use in distribution systems and industrial plants.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Solenoid Valves
- Mã SP: LADEC-760
- Lượt xem: 5070
- Tình trạng:
- Two Way, Normally Open or Normally Closed, Aluminum Body
  
  These valves are offered as Model 8214 vent valves from 3/4" to 2-1/2", Model 8040 pilot gas valves in 1/4" to 3/8", Model 8214 direct operating valves from 3/8" to 3/4", Model 8214 internal pilot operated valves from 1/2" to 3", Model 8214VI valves with visual indication from 3/4" to 3", and Model 8214C valves with proof of closure and indication from 3/4" to 3".
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- AutoTite Gas Shut-Off Valves
- Mã SP: LADEC-756
- Lượt xem: 4950
- Tình trạng:
- AutoTite shut-off valves set the industry standard with broad NEMA approval.
  
  Engineered and built with the precision you've come to expect from Eclipse, each AutoTite 2000AT valve is Performance Certified - 100% factory tested before shipment.
  
  For medium pressure range applications, you can't find automatic gas shut-off valves with more installation flexibility, operational conveniences, and peace-of-mind safety features.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- LockTite Manual Reset Gas Shut-Off
- Mã SP: LADEC-750
- Lượt xem: 5164
- Tình trạng:
- The Eclipse Inc. 200 LockTite valves are manually opening valves that automatically shut off the gas supply to a combustion system when any interlocking limit switch opens. The valve handle cannot be reset until the condition causing the open switch is corrected and all limit switches are closed. Typical limit switches include air pressure, gas pressure, temperature limit, and flame monitoring contacts.
  
  In the event of a power failure, the valve immediately closes. Series 200 LT valves include two visual indicators of "open" or "closed" position: a red "flag" visible in the plastic dome on top of the valve; and the reset handle position as indicated by cast markings on the operator case. These valves also include two SPDT micro-switches that can be used for auxiliary circuits. Two contacts are made when the valve opens, and two are made when the valve is closed.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Eclipse Ratio Regulators
- Mã SP: LADEC-742
- Lượt xem: 4902
- Tình trạng:
- The ES-Series ratio regulators are used in applications where gas to air proportional flow is required. The gas flow is controlled as a function of the air pressure through a loading line which connects into the top of the regulator.
  
  As the system air pressure increases, it forces the ratio regulator valve to open causing the outlet pressure to increase until the two pressures balance. As the load line pressure increases, the ratio of the outlet pressure to the load line pressure will be slightly less than 1:1.
  
  The ratio regulators have a bias adjustment for varying the gas flow when setting the burner at low fire. It can be used to increase or decrease the gas flow resulting in gas rich or lean combustion. The adjustment is restricted in the gas rich direction, therefore, limiting the gas flow at zero air pressure.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Maxitrol Supplied Zero Governors
- Mã SP: LADEC-741
- Lượt xem: 4955
- Tình trạng:
- Maxitrol Zero Governor model regulators are used for flow control of burners, nozzle mixers, mixing tees and proportional premixers. Gases: Natural, manufactured, mixed, liquified petroleum or LP gas-air mixture.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Blast Gate Valve
- Mã SP: LADEC-734
- Lượt xem: 5099
- Tình trạng:
- Eclipse Blast Gates are sturdy, inexpensive manual control valves for use with low pressure air up to 5 psig.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Adjustable Orifice Valve
- Mã SP: LADEC-728
- Lượt xem: 5259
- Tình trạng:
- Eclipse ALO-R Valves are needle and seat type valves designed to provide accurate gas flow adjustment when installed in gas lines feeding nozzle mix burners. Eclipse ALO Valves are recommended for installation in gas lines feeding nozzle mix burners as a means of gas flow adjustment for the desired air/gas ratio.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- BV-Pak Packaged Butterfly Valves
- Mã SP: LADEC-725
- Lượt xem: 4872
- Tình trạng:
- The Eclipse Packaged Butterfly Valve incorporates an Eclipse Trilogy T500 Series Actuator mounted to a standard Eclipse butterfly valve. This package is the perfect solution for industrial burner and damper control. Eclipse simplifies selection and ordering in this single source component purchase. Equipment sizing, mounting, and setup are all made easier.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Butterfly Valves
- Mã SP: LADEC-720
- Lượt xem: 5005
- Tình trạng:
- Eclipse Butterfly Valves are designed to control air and gas flow to all types of combustion systems. They should not be used as tight shut-off valves.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Manual Shut-Off Valves
- Mã SP: LADEC-710
- Lượt xem: 4898
- Tình trạng:
- Manual Shut Off Gas Cock
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :