TMI-EasyTherm 15 High Power Induction Bearing Heater

Technical advantages of TM Easy therm induction heaters:

• Manufactured according to the CE Regulations.
• Fast heating process through high output; Cos phi > 0.8.
• The heating coil is placed horizontal under the part;
  • By this it is impossible to damage the coil
  • This ensures an equal temperature all over the part (inner- and outer ring).
  • This makes it able to heat up parts with smaller bores.
• All heaters are continuously useable without any optional cooling system.
• Constantly monitoring heating process by probe and microprocessor.
• Temperature control accuracy +/- 2°C.
• Timer accuracy 0.01 sec.
• Maintenance free.
• Three years warranty.
• Easy to use; user friendly design.
• Ergonomic design (pivoting yoke principle).
• Automatic power regulation, no manual pre-setting necessary.
• Less than 2A/cm residual magnetism.

• Voltage: 380-480V
• Frequency: 50/60Hz
  
• Power: 12.8kVA
  
• Max. Temp.: 240/400°C
  
• Weight of heater: 51kG
  
• Dimensions of heater (lxbxh): 505x260x240
• Width U-core: 210mm
• Height U-core: 215mm
  
• Induction yokes(mm): 23/30/40/50/60/70 (individually purchased)
  
• Max.diameter of work piece: 560mm
  
• Max. width of Work piece: 210mm
  
• Max. weight of Work piece: up to 150kg (depending on Yoke)