Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Extra Large V-Anvil for round parts with a diameter between 60-150 mm (2.4 - 5.9 in). For UH930, 3000BLD, and old Wolpert Testor and DiaTestor models.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Stage micrometer for verification of your Brinell Microscope or optical system

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The 1-in pedestal spot anvil is typically used for testing small parts and sheet metals where minimal support is required. This accessory is available for all Wilson® Hardness early model Rockwell® Hardness Testers, as well as current model Rockwell 574 and Rockwell 2000 Series Hardness Testers.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The Cylindron Anvil is designed to support cylindrical specimens ranging from 2 - 8 in (50 - 203 mm) in diameter.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The 2.5-in diameter Flat Anvil is intended to support a wide assortment of flat specimens, keeping the sample 90 degrees perpendicular to the indenter.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Clamping fixtures are useful for applying pressure to test specimens during hardness evaluation. The 574 Clamping Fixture applies 60 kgf (132 lbs) to the specimen prior to test and independent of load application. This ensures that the sample does not shift while holding it secure to the anvil during the test process.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The Wilson® Hardness T-Slot table offers an easy method for testing large or bulky test specimens which require clamping to prevent the part from moving during load application. The table is 13 X 11 inches (330 X 279.4 mm) in size and is available for the Rockwell 2000 hardness testers

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The V Anvil accessory is available on all of Wilson® Hardness early model Rockwell hardness testers as well as the Rockwell 574 and 2000 Series hardness testers. This accessory is perfectly suited for testing cylindrical shaped specimens such as rods and tubing. Sample sizes can range from 1/4 diameter and larger.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The Vari Rest Supporting Fixture is ideal for proper support of elongated parts during Rockwell testing.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Small Gooseneck adapters are available in three sizes to permit regular or superficial models to perform internal tests on rings, tubes or annular parts where the inside diameter, plus the wall thickness, is less than 50.8 mm (2 in).

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The small precision vise is used to safely clamp your small your specimens during testing. Accomodates specimens up to 45mm (1.77in) wide.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The Wilson® Hardness EZ-Clamp Sample Holder offers an innovative solution for supporting Knoop/ Vickers cut and mounted samples. This unique sample holder offers an improved solution for maintaining symmetry and sample positioning while simultaneously simplifying the setup process prior to hardness evaluation

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Wilson® Hardness Minuteman automation packages can quickly improve testing efficiency by reducing operator interaction with the hardness testing equipment. Minuteman automation packages are available for the 402MVD, Tukon 2500 and Rockwell 2000 Series hardness testers. Automation packages are offered in an assortment of configurations ranging from entry level to fully automatic indentation analysis systems.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Test Blocks

Used to check the accuracy of Knoop / Vickers testers, Wilson® Hardness test blocks set the standard for the industry. Available in a comprehensive range of nominal hardness values and load force applications, Wilson Hardness Knoop and Vickers test blocks are highly polished, precision calibrated, and are NVLAP® certified to meet all relevant ASTM and ISO standards.

Indenters

Precision crafted diamond indenters insure world class performace and compliance to strict geometrical qualifications mandated by ASTM and ISO standards.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Test Blocks

Rockwell test blocks are calibrated in accordance with ASTM E18 and ISO 6508, using NIST Rockwell HRC standard reference materials. All other Rockwell scales are traceable to Wilson® Hardness levels through laboratory standardizing test machines. All Wilson Hardness laboratory machines are directly verified according to application ASTM parameters using devices that are traceable to NIST either directly or through a NVLAP® approved laboratory. All blocks are supplied with a NVLAP Certificate of Accreditation.

Indenters and Calibration Sets

Wilson® Hardness also provides a full range of NVLAP certified diamond and ball indenters to accomodate each scale of Rockwell hardness testing. For ultimate accuracy and performance in tester verification, calibration sets are available in most scales. Precision calibrated and verified, calibration sets provide a high degree of uniformity through tighter tolerance components.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Test Blocks

Wilson® Hardness Brinell test blocks are made from the highest quality material to ensure the most uniform and repeatable blocks available. The unique, closed-loop load cell instrument used for Brinell block calibration guarantees that the most stable and accurate test process is performed, promising the highest quality block on the market. Brinell test blocks are calibrated to meet American and international standards at the Wilson Hardness Calibration Laboratory. The Wilson Hardness lab is accredited to ISO/IEC 17025 by NVLAP®.

A comprehensive selection of test blocks are available to meet the variety of hardness ranges and scales associated with Brinell testing.

Indenters

Wilson Hardness provides a full range of ASTM E-10 compliant indenters in 2.5 mm, 5 mm, and 10 mm ball sizes, available for all current and legacy Wilson Brinell testing instrumentation.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The Micro O-Ring system produces accurate, repeatable hardness readings on soft elastomers too thin or too irregular in shape, such as small o-rings, for measurement with a standard durometer. the O-Ring is used on specimens with cross sections as thin as 1.25 mm (0.1 in). The special indenter and hydraulically controlled descent attain minimal indenter penetration and material deformation. Shore Micro-O-Ring test systems conform to ASTM D2240-00 for Type M (micro hardness durometer).

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Shore Instruments Analog Durometers are handheld hardness testers specifically designed for rubber and other elastomeric materials. The testers have a calibrated spring that generates a known force on the indenter. The durometer measures hardness by determining the depth of penetration of the indenter into the material under test. The hardness measurement displays on an analog scale.