TPI-707 Carbon Monoxide Analyzer

APPLICATIONS

• Thermocouples in furnace and gas appliances
•  Heat anticipator current in thermostats
•  Line voltages
•  Control Voltages
•  Flame safety control current
•  Heating element resistance
•  Compressor winding resistance
•  Contractor and relay coil resistance
•  Motor and compressor startup current
•  Motor run and start capacitors
•  Bar graph indicator of rapid fluctuations
•  Continuity of wiring
•  Measure frequency on control and line voltage
•  Record minimum and maximum of measurements
•  Measure temperature
•  Measure true RMS of distorted or non-linear signals
•  Measure line current
•  Test continuity of circuit breakers and fuses
•  Measure voltage of direct drive DC motors
•  Measure power supply voltage
•  Measure power supply current
•  Non-contact Voltage Detection

• Auto/Manual

DISPLAY SPECIFICATIONS

• 4,000 count
• Analog bar graph

BASIC FEATURES

• AC volts
• DC volts
• AC amps
• DC Microamps (using the test leads)
• Resistance
• Diode test
• Audible continuity

ADDITIONAL FEATURES

• Frequency
• Capacitance
• Temperature
• Non-Contact voltage detection
• Data hold
• Relative Mode
• Min/max/peak
• Peak hold
• Sleep mode/Auto off

RANGE AND RESOLUTION

• Basic DC Accuracy: .5%
• DC Voltage (maximum): 600V
• Resolution (maximum): 0.1mV
• AC Voltage (Maximum): 600V
• Resolution (maximum): .1mV
• DC Amps (maximum): 400µA
• Resolution (maximum): .01µA
• AC Amps (maximum): 400mA
• Resolution (Maximum): .01 A
• Resistance (maximum): 40MΩ
• Resolution (maximum): 0.1Ω
• Frequency (maximum): 400MHz
• Resolution (maximum): .001KHz
• Capacitance (maximum): 40,000°F
• Resolution (maximum): .001nF
• Temperature (maximum): 1000°F

AGENCY APPROVAL

• CE IEC 1010: CAT III 600V
• cULus 3111: Pending

• Self test at power on
• Adjustable contrast
• Uses common thermal paper
• Manual paper advance

TPI-A312

Dual input temperature adapter, -40 to 1,800 °F range with two Standard fiberglass insulation probes (4 foot, beaded end)