Building Moisture Measurement Kit Universal

For the measurement of the following: Building humidity (even non-destructively!), wood humidity (incl. temperature compensation => increased accuracy!) and relative air humidity, dew point temperature, air and surface temperature, long-term recording ... Kit includes the following measuring instruments: T2000 S multi-function measurement unit

Multi-function measurement unit with digital precision for humidity, temperature and air flow measurements. Possibility of connecting Trotec SDI sensors, Pt100 sensors as well as round, flat and layer-depth electrodes for material, wood and building humidity measurement.

TS 200 SDI climate sensor

For measuring air and dew point temperatures as well as relative and absolute air humidity (connectable to the T2000 S).

TS 300 SDI material humidity sensor

Capacitive sensor with alarm function for non-destructive determination of humidity levels in surface-proximity areas of up to 4 cm (connectable to T2000 E and S units).

TS 60 hand electrode

For wood and building humidity measurements using the resistance process (connectable to T500, T2000 S as well as DL 100 F and P units).

Replacement electrode tips, tin

TC 20 connector cable

TC 30 connector cable

TS 012/200 round electrodes, pair, 4 mm, insulated

Insulated electrodes (length 200 mm, diameter 4 mm) for targeted humidity measurements in hidden horizontal building levels where it is necessary to use insulated electrode rods. Faulty insulation will result in wrong measurement results. From experience, these are most commonly used to determine moisture distribution within multi-wall or ceiling structures such as floating screeds, multi walls, beamed ceilings, unventilated roofs, etc.

TS 16/200 flat electrodes, pair

Insulated electrodes for material humidity measurements using the resistance process (connectable to T500, T2000 S as well as DL 100 F and P units).

Contact mass

BP20 pyrometer

The BP20 infrared thermometer has a very wide range of applications. The unit is commonly used for a wide range of processes in industry, handicrafts, trade and hobbies. Infrared thermometers are used for contact-free measurement of surface temperatures and are thus optimally suited for assessing dew points and determining heat loss is areas such as wall surfaces. These are also suitable for localising heating loops in flooring or inspecting components in switching cabinets or for controlling temperatures in motors, turbines, bearings, etc. The BP20 has a geometric resolution of 12:1.

BD15 laser distance meter

Fast and precise measurements of distances up to of 50 m, volumes and areas. Minimum, maximum and Pythagoras functions for indirect measurements, Softtouch shortcut keys for addition und subtraction as well as area and volume calculations and many other functions.

1 x MultiMeasure usage case II Standard