Wood humidity measurement kit professional plus LV expansion For the professional determination of wood humidity, building humidity and rel. humidity, dew point temperature, air and surface temperature, optical inspections, thermal objects diagnostics, ...
Most important benefits in practice: very high geometric resolution of 1.1 mrad, high performance image sensor with 384 x 288 measuring points, extremely accurate temperature measurements from -20 °C to +600 °C, fully radiometric infrared camera from original EU production, high image repetition frequency of 50/60 Hz, digital camera for real images, DuoVision function for picture-in-picture presentation, very high thermal sensitivity of 0.08 °C. T2000 S multi-function measurement unit Multi-function measurement unit with digital precision for humidity, temperature and air flow measurements. Possibility of connecting Trotec SDI sensors, Pt100 sensors as well as round, flat and layer-depth electrodes for material, wood and building humidity measurement. TS 200 SDI climate sensor For measuring air and dew point temperatures as well as relative and absolute air humidity (connectable to the T2000 S). TS 130/150 PT 100 surface temperature sensor, 4 mm This Class B sensor is particularly suited for temperature compensation when determining wood humidity. The head of the 150 mm long measurement tip (diameter 4.5 mm) has a spring-loaded, mounted sensor which determines the temperature. Measurement range from -50 to +400°C. TS 60 hand electrode For wood and building humidity measurements using the resistance process (connectable to the T2000 S and DL 100 F). TS 070 ram in electrode With manoeuvrable grips for accurate area and depth measurement, particularly for woods with different humidity distributions, such as liquid areas, using Teflon-insulated electrode tips. These are 45 mm in length. V1 Test Block For checking deviations in measurements and for monitoring the measuring accuracy when using resistance electrodes to measure moisture in wood or building materials with the T500 and the T2000S MultiMeasure moisture meters. Replacement electrode tips, tin TC 20 connector cable TC 30 connector cable TP 6 laser thermometer The TP 6 infrared thermometer has a very wide range of applications. The unit is commonly used for a wide range of processes in industry, handicrafts, trade and hobbies. Infrared thermometers are used for contact-free measurement of surface temperatures and are thus optimally suited for assessing dew points and determining heat loss is areas such as wall surfaces. These are also suitable for localising heating loops in flooring or inspecting components in switching cabinets or for controlling temperatures in motors, turbines, bearings, etc. The TP6 has a geometric resolution of 30:1. 60 mm Teflon electrode tips for TS 070 BO25 mini videoscope Enables optical inspections even in hard-to-reach areas for documenting not only images, but also videos on an SD storage card. Images and videos can even be displayed on an external tv screen or be transferred to a computer. An interchangeable, semi-flexible video probe (ø17 mm) with a length of 100 cm and a waterproof camera head with IP67, 180° image reversal function and a powerful quad LED illumination with a continuously variable brightness control ensure meaningful images and video recordings in nearly every area to be inspected. There’s a side view mirror, hook and magnet included in the scope of supply. 1 x MultiMeasure case II with bubble inlay