The CM-Business Set includes:
1. A digital scales with an automatic power-off function that can weigh materials up to 150g with an accuracy of 0.1g in as little as 3 seconds. The three 1.5 V AAA batteries required to power the digital scales and a calibrating weight (100g) are included in the scope of delivery. Digital displays reduce the risk of misreadings and subsequent errors based on such false readings. 2. Two specially-designed scales dishes that allow you to transfer your building material sample to the bottle with least possible spillage 3. Tools to take the samples 4. 4 metal balls 5. 20 carbide vials 6. 3 test vials with 1g of water (to ensure that the bottle/manometer are properly sealed) 7. 3 replacement seals for the manometer and the pressure cylinder,spoon and cleaning brush 8. Easy to read operating instructions, plus quick-start guide 9. Sturdy metal carry case guarantees that everything is where you need it - when you need it
A CM set can not only save you a lot money - which in itself would seem to be a strong enough selling point as far as most people are concerned – it can save you a lot of time and grief too.
The CM sets from Trotec come in a fully-equipped case which contains all you need to measure the residual moisture content in sub-floors and other foundations in order for you to be able to determine when the time is right to lay building materials such as floor screed. Knowing when the time is right is no small affair. If the time is not right and the moisture content of the sub-floor is too high, then such miscalculations can quickly lead to lasting damage to the whole floor structure or result in costly repair work when the floor has to be ripped out and replaced. A flurry of court cases involving a number of construction companies hit the headlines recently when the builders and planners involved felt that they could go ahead with their building projects and lay floor screed without first correctly determining whether the moisture content of the sub-floor was within the tolerable levels. Obviously these builders were prepared to rely more on their experience – or lack of it – as the cases against them appear to suggest. CM sets are already used by architects, site managers and contractors all over Europe to carry out CM measurements that allow them to establish the moisture content of the sub-floor or layer on which screed - or tiles, for example - are to be laid both quickly and reliably. These professionals have chosen not to rely solely on their own experience but on a tried and trusted method with which the residual moisture content can be established on site and in time to prevent any further damage, costs – and grief – from occurring. Buy your own CM Business Set now and be up there with the professionals who have chosen to rely on a fail-safe moisture measuring method and not just an (in)experienced guess.